Just a non-technical (but important!) point: if you send four patches, make sure their title (the first line of your git commit messages) describes the content. Given you re-used the same title four times, I dare to say it's too generic. Also, I noticed that this is not the standard git patch format as produced by git format-patch. I don't know whether this is a concern (or whether you tweaked the format yourself), but in the off chance that you are relatively new to git, I recommend you to look up the "git format-patch" and "git send-email" commands. They make life a lot easier in our mailing-list based work-flow! This being said, thanks for the work! I'm sure with a bit of minor tweaking this is suitable for upstream.

Roy

Op 13-04-17 om 10:07 schreef Oscar Salvador:
Hi again,

I've split the patches as Karol Herbst suggested.
I hope now it's fine.

This series of patches introduce the new hwmon_device_register_with_info
and gets rid of the old hwmon_device_register.

This patch adds the default sensors with their possible config values.
Just to prepare for the next patches


--- linux/drivers/gpu/drm/nouveau/nouveau_hwmon.c.orig  2017-04-12 
19:18:09.638073562 +0200
+++ linux/drivers/gpu/drm/nouveau/nouveau_hwmon.c       2017-04-12 
19:19:44.244797202 +0200
@@ -692,6 +692,78 @@ static const struct attribute_group hwmo
  static const struct attribute_group hwmon_power_caps_attrgroup = {
        .attrs = hwmon_power_caps_attributes,
  };
+
+static const u32 nouveau_config_chip[] = {
+       HWMON_C_UPDATE_INTERVAL,
+       0
+};
+
+static const u32 nouveau_config_in[] = {
+       HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX | HWMON_I_LABEL,
+       0
+};
+
+static const u32 nouveau_config_temp[] = {
+       HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_MAX_HYST |
+       HWMON_T_CRIT | HWMON_T_CRIT_HYST | HWMON_T_EMERGENCY |
+       HWMON_T_EMERGENCY_HYST,
+       0
+};
+
+static const u32 nouveau_config_fan[] = {
+       HWMON_F_INPUT,
+       0
+};
+
+static const u32 nouveau_config_pwm[] = {
+       HWMON_PWM_INPUT | HWMON_PWM_ENABLE,
+       0
+};
+
+static const u32 nouveau_config_power[] = {
+       HWMON_P_INPUT | HWMON_P_CAP_MAX | HWMON_P_CRIT,
+       0
+};
+
+static const struct hwmon_channel_info nouveau_chip = {
+       .type = hwmon_chip,
+       .config = nouveau_config_chip,
+};
+
+static const struct hwmon_channel_info nouveau_temp = {
+       .type = hwmon_temp,
+       .config = nouveau_config_temp,
+};
+
+static const struct hwmon_channel_info nouveau_fan = {
+       .type = hwmon_fan,
+       .config = nouveau_config_fan,
+};
+
+static const struct hwmon_channel_info nouveau_in = {
+       .type = hwmon_in,
+       .config = nouveau_config_in,
+};
+
+static const struct hwmon_channel_info nouveau_pwm = {
+       .type = hwmon_pwm,
+       .config = nouveau_config_pwm,
+};
+
+static const struct hwmon_channel_info nouveau_power = {
+       .type = hwmon_power,
+       .config = nouveau_config_power,
+};
+
+static const struct hwmon_channel_info *nouveau_info[] = {
+       &nouveau_chip,
+       &nouveau_temp,
+       &nouveau_fan,
+       &nouveau_in,
+       &nouveau_pwm,
+       &nouveau_power,
+       NULL
+};
  #endif
int
_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/nouveau

_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/nouveau

Reply via email to