On Mon, Oct 21, 2019 at 10:36:02PM -0400, Lyude Paul wrote:
> This probably hasn't caused any problems up until now since it's
> probably nearly impossible to encounter this in the wild, however if we
> were to receive a connection status notification from the MST hub after
> resume while we're in the middle of reprobing the link addresses for a
> topology then there's a much larger chance that a port could have
> changed from being an output port to input port (or vice versa). If we
> forget to update this bit of information, we'll potentially ignore a
> valid PDT change on a downstream port because we think it's an input
> port.
> 
> So, make sure we read the input_port field in connection status
> notifications in drm_dp_mst_handle_conn_stat() to prevent this from
> happening once we've implemented suspend/resume reprobing.
> 
> Cc: Juston Li <juston...@intel.com>
> Cc: Imre Deak <imre.d...@intel.com>
> Cc: Ville Syrjälä <ville.syrj...@linux.intel.com>
> Cc: Harry Wentland <hwent...@amd.com>
> Cc: Daniel Vetter <daniel.vet...@ffwll.ch>
> Signed-off-by: Lyude Paul <ly...@redhat.com>
> Reviewed-by: Sean Paul <s...@poorly.run>
> ---
>  drivers/gpu/drm/drm_dp_mst_topology.c | 52 +++++++++++++++++++--------
>  1 file changed, 38 insertions(+), 14 deletions(-)
> 
> diff --git a/drivers/gpu/drm/drm_dp_mst_topology.c 
> b/drivers/gpu/drm/drm_dp_mst_topology.c
> index 7bf4db91ff90..c8e218b902ae 100644
> --- a/drivers/gpu/drm/drm_dp_mst_topology.c
> +++ b/drivers/gpu/drm/drm_dp_mst_topology.c
> @@ -2079,18 +2079,40 @@ drm_dp_mst_handle_conn_stat(struct drm_dp_mst_branch 
> *mstb,
>  {
>       struct drm_dp_mst_topology_mgr *mgr = mstb->mgr;
>       struct drm_dp_mst_port *port;
> -     int old_ddps;
> -     bool dowork = false;
> +     int old_ddps, ret;
> +     u8 new_pdt;
> +     bool dowork = false, create_connector = false;
>  
>       port = drm_dp_get_port(mstb, conn_stat->port_number);
>       if (!port)
>               return;
>  
> -     /* Locking is only needed if the port's exposed to userspace */
> -     if (port->connector)
> +     if (port->connector) {
> +             if (!port->input && conn_stat->input_port) {
> +                     /*
> +                      * We can't remove a connector from an already exposed
> +                      * port, so just throw the port out and make sure we
> +                      * reprobe the link address of it's parent MSTB
> +                      */
> +                     drm_dp_mst_topology_unlink_port(mgr, port);
> +                     mstb->link_address_sent = false;
> +                     dowork = true;
> +                     goto out;
> +             }
> +
> +             /*
> +              * Locking is only needed if the port's exposed to userspace
> +              */

optional nit: this will still fit on one line

>               drm_modeset_lock(&mgr->base.lock, NULL);
> +     } else if (port->input && !conn_stat->input_port) {
> +             create_connector = true;
> +             /* Reprobe link address so we get num_sdp_streams */
> +             mstb->link_address_sent = false;
> +             dowork = true;
> +     }
>  
>       old_ddps = port->ddps;
> +     port->input = conn_stat->input_port;
>       port->mcs = conn_stat->message_capability_status;
>       port->ldps = conn_stat->legacy_device_plug_status;
>       port->ddps = conn_stat->displayport_device_plug_status;
> @@ -2103,21 +2125,23 @@ drm_dp_mst_handle_conn_stat(struct drm_dp_mst_branch 
> *mstb,
>               }
>       }
>  
> -     if (!port->input) {
> -             int ret = drm_dp_port_set_pdt(port,
> -                                           conn_stat->peer_device_type);
> -             if (ret == 1) {
> -                     dowork = true;
> -             } else if (ret < 0) {
> -                     DRM_ERROR("Failed to change PDT for port %p: %d\n",
> -                               port, ret);
> -                     dowork = false;
> -             }
> +     new_pdt = port->input ? DP_PEER_DEVICE_NONE : 
> conn_stat->peer_device_type;
> +
> +     ret = drm_dp_port_set_pdt(port, new_pdt);
> +     if (ret == 1) {
> +             dowork = true;
> +     } else if (ret < 0) {
> +             DRM_ERROR("Failed to change PDT for port %p: %d\n",
> +                       port, ret);
> +             dowork = false;
>       }
>  
>       if (port->connector)
>               drm_modeset_unlock(&mgr->base.lock);
> +     else if (create_connector)
> +             drm_dp_mst_port_add_connector(mstb, port);
>  
> +out:
>       drm_dp_mst_topology_put_port(port);
>       if (dowork)
>               queue_work(system_long_wq, &mstb->mgr->work);
> -- 
> 2.21.0
> 

-- 
Sean Paul, Software Engineer, Google / Chromium OS
_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/nouveau

Reply via email to