Hi, The NAT is definitely the problem. You can ping the switch from the vm but I bet the switch is not able to talk to the controller. You should remove the nat or configure the nat to forward your controller traffic to your vm.
Aaron On Fri, Mar 23, 2012 at 1:17 PM, Weiyang Mo <[email protected]> wrote: > Hi, all, > > I go through the Pronto 3290 setup step by step now come to the final > step. But I cannot connect the NOX-classic controller. > My NOX controller is in VM which supports NAT(10.0.3.15) and > Host-only(192.168.56.102). And my local host is (192.168.1.100). > > I set the following configuration in the switch panel and I can ping the > switch(192.168.1.1) from the Virtual machine where the NOX locates in. > The switch IP:192.168.1.1 > The gateway for the switch: 10.0.3.1 > The IP address for the OpenFlow Controller: 10.0.3.15 > > is that the NAT one(10.0.3.15) for controller IP address? additionally I > have a host-only IP 192.168.56.102. > > Then In my virtual machine. I run the controller via "./nox_core -v -i > ptcp:6633 mycontroller". Then the switch should be able to connect the > controller, right? > However after doing this, it still shows "network unreachable". > > How can I solve it? Do you get similar problems before? > Best > Weiyang > -- Aaron O. Rosen Masters Student - Network Communication 306B Fluor Daniel
