It requires traffic in order to reconstruct host-level information.
Hi Martin,
Thanks for your info, So, I can just run nox_core component
pyauthenticator so this component will discover nodes which are
connecting to the switch
"Without any traffic generated from that host to switch " ? or I need
to run traffic ( example: having host1 ping host2)
Thanks
Thuymai
------------------------------------------------------------------------
*From:* Martin Casado <cas...@nicira.com>
*To:* Chonduy Nguyen <chond...@yahoo.com>
*Cc:* nox-dev@noxrepo.org
*Sent:* Tue, January 26, 2010 12:47:57 PM
*Subject:* Re: [nox-dev] directoryws not on version 0.6
There are no webservices which directly expose authenticator. To do
that, you're going to have to resolve PyAuth() and then call the
accessor methods directly (e.g. get_authed_addresses(..) ).
As an example of how to create a webservice, see
src/nox/webapps/miscws/cpustats.py
>
> Hi Martin
>
> I upgraded nox to be 0.6 - but observed that the
directorymanagerws.py and its directory folder is not
> available on this version - This one is the one using authenticator
>
> Do you have any idea?
>
> I would like to see full topology of switch connects to host - etc...
>
> Can you please give any more details advice ?
>
> Thank you,
>
> TNguyen
>
>
> ------------------------------------------------------------------------
> *From:* Martin Casado <cas...@nicira.com <mailto:cas...@nicira.com>>
> *To:* Chonduy Nguyen <chond...@yahoo.com <mailto:chond...@yahoo.com>>
> *Cc:* nox-dev@noxrepo.org <mailto:nox-dev@noxrepo.org>
> *Sent:* Mon, January 25, 2010 10:45:11 PM
> *Subject:* Re: [nox-dev] nox core discovery
>
> Discovery only shows links between switches, not between switches
and hosts. For that, you'll have to explore authenticator.
>
> > Hi
> >
> > I am new with this module -
> > I have switch setup and connected with flowvisor - and nox_core
ran with discoveryws and discovery module.
> > The switch also connected to 2 other physical machines
> >
> > However, when I ran webservice to look at the discovery object - I
saw it only show
> >
> > Ethernet packet of the switch - where the dst value is the value
on the file ethernet.py (NDP_MULTICAST)
> >
> > I am wondering what can I do to get nox discovery to show a
topology connection between switch and the other 2 client machines?
> >
> > Below are the print out of the discovery object of LLDP packets
> >
> > PORT 0: EthernetPackageDESC:
[5a:8c:29:22:d3:a9>01:23:20:00:00:01:LLDP]<chassis
ID:5a:8c:29:22:d3:a9><port ID:00:00><ttl:120><tlv end>
> > PORT : 1 EthernetPackageDESC:
[5a:8c:29:22:d3:a9>01:23:20:00:00:01:LLDP]<chassis
ID:5a:8c:29:22:d3:a9><port ID:00:01><ttl:120><tlv end>
> > ~ > Thanks
> >
> > Nguyen
>
------------------------------------------------------------------------
> >
> > _______________________________________________
> > nox-dev mailing list
> > nox-dev@noxrepo.org <mailto:nox-dev@noxrepo.org>
<mailto:nox-dev@noxrepo.org <mailto:nox-dev@noxrepo.org>>
> > http://noxrepo.org/mailman/listinfo/nox-dev_noxrepo.org
> >
>
_______________________________________________
nox-dev mailing list
nox-dev@noxrepo.org
http://noxrepo.org/mailman/listinfo/nox-dev_noxrepo.org
