Hi Kiani, There is a typo or a mistake in the command.
git checkout openflow-1.0 should be git checkout -b openflow-1.0 orgin/openflow-1.0 Regards KK On 13 July 2010 08:55, Kiani, Parham <pki...@essex.ac.uk> wrote: > Hi Murphy > thanks for your help. I have triyed to install it again, unfortunately, when > i run "make" it seems it never stop or compile, it repeats some commands, so > it force me to stoped by hand. i was wondering if you could take a look at > it.( attached file) > git clone git://noxrepo.org/nox > cd nox > git checkout openflow-1.0 > ./boot.sh > mkdir build > ../configure --with-python=yes --enable-ndebug > make > > > ________________________________________ > From: James "Murphy" McCauley [jam...@nau.edu] > Sent: 13 July 2010 14:52 > To: Kiani, Parham > Cc: nox-dev@noxrepo.org > Subject: Re: [nox-dev] problem with connect Nox to switch > > Looks like a simple version mismatch. The version of Open vSwitch > you're using supports OpenFlow 1.0 (wire protocol 0x01). The version of > NOX you're using supports OpenFlow 0.8.9 (wire protocol 0x97). > > So somehow you need to get your versions matched up. I have no idea how > FlowVisor factors in, since I don't know which versions of OpenFlow it > supports, but if you want to build a version of NOX that supports > OpenFlow 1.0, you should use the openflow-1.0 branch: > git clone git://noxrepo.org/nox > cd nox > git checkout openflow-1.0 > > -- Murphy > > On Tue, 2010-07-13 at 14:05 +0100, Kiani, Parham wrote: >> Hi all >> I have a controller with nox and flowvisor and a computer with 5ports >> (openvswitch) as a first switch. i used to connect my switch to controller >> easily( ovs-openflowd dp0 tcp: 192.168.1.2). I have tried with help of >> vmware create another slice and install openvswitch as second switch. the >> problem accure when I wanted to connnect two switches to controller. but >> now, I can not even connect the first switch to controller. I have planning >> to create three switch in this computer ( 5ports), do i need three nox and >> flowvisor? thaks in advance . >> >> >> :/nox/build/src$ sudo ./nox_core -i ptcp:6633 switch packetdump >> NOX 0.8.0~full~beta (nox_core), compiled Jun 10 2010 19:46:40 >> Compiled with OpenFlow 0x97 (exp) >> 00001|openflow|WARN:stream: version negotiation failed: we support versions >> 0x97 to 0x97 inclusive but peer supports no later than version >> >> >> >> sudo ovs-openflowd dp0 tcp:192.168.1.2 >> Jul 13 13:34:20|00001|openflowd|INFO|Open vSwitch version 1.0.1 >> Jul 13 13:34:20|00002|openflowd|INFO|OpenFlow protocol version 0x01 >> Jul 13 13:34:20|00003|ofproto|INFO|using datapath ID 00000023208adfd2 >> Jul 13 13:34:20|00004|rconn|INFO|dp0<->tcp:192.168.1.2: connecting... >> Jul 13 13:34:20|00005|rconn|INFO|dp0<->tcp:192.168.1.2: connected >> Jul 13 13:34:20|00006|rconn|INFO|dp0<->tcp:192.168.1.2: connection closed by >> peer >> >> >> Regards >> >> >> >> _______________________________________________ >> nox-dev mailing list >> nox-dev@noxrepo.org >> http://noxrepo.org/mailman/listinfo/nox-dev_noxrepo.org > _______________________________________________ > nox-dev mailing list > nox-dev@noxrepo.org > http://noxrepo.org/mailman/listinfo/nox-dev_noxrepo.org > > _______________________________________________ nox-dev mailing list nox-dev@noxrepo.org http://noxrepo.org/mailman/listinfo/nox-dev_noxrepo.org
