Hi, If the message is sent properly, NOX is working fine. And since you have posted in openflow-discuss, someone should get to that.
Regards KK On 19 November 2010 15:00, Raghu Gowda <raghuhgo...@gmail.com> wrote: > Hi All, > > This is regarding the add-flow command using dpctl for userspace switches. > The setup is based on Openflowvms, Openflow1.0 based switch and nox > controller. > A virtual network topology of three hosts connected to a switch is > generated. > Ping between hosts is successful. The OF protocol messages between the > switch and the controller is verified using wireshark. > > However when we attempt to look into the flow table of the switch using > dump-flows command, no entries are found. The following message is > displayed, > > qemu:/cdrom# ./dpctl dump-flows unix:/var/run/dp0 > stats_reply (xid=0x757be3e2): flags=none type=1(flow) > > It is made sure that the flows are not expired when the command is given. > Also the flows added by dpctl command has no effect on the switch > functionality. > > Do let us know if addition/modification/deletion of flows via dpctl commands > has any dependency on the activity of the controller for userspace switches. > > Kindly help us to resolve this issue. > > Thanks, > Raghu > > _______________________________________________ > nox-dev mailing list > nox-dev@noxrepo.org > http://noxrepo.org/mailman/listinfo/nox-dev_noxrepo.org > > _______________________________________________ nox-dev mailing list nox-dev@noxrepo.org http://noxrepo.org/mailman/listinfo/nox-dev_noxrepo.org
