Hi Ramana, You can go into the provided hda.dsk and update that (using vms-qemu-run.py). The creation of hda.dsk is a little complicated and platform specific---here being Debian.
Regards KK On 9 March 2011 02:49, Ramana Reddy <gtvrre...@gmail.com> wrote: > Yaa, I tried and succeeded with provided hda.dsk and kernel.bin on that > page with corresponding > openflow1.0 binary. But I want to create my own and failed to do hda.dsk and > kernel.bin using the scripts. > I am using ubuntu 10.10. > > Regards, > Ramana. > > > On Wed, Mar 9, 2011 at 4:08 PM, Kyriakos Zarifis <kyr.zari...@gmail.com> > wrote: >> >> did you try downloading and using the provided hda.dsk and kernel.bin on >> that page, instead of using the scripts to build your own? >> I'd try using these, as well as the provided openflow1.0 binary >> >> On Wed, Mar 9, 2011 at 2:30 AM, Ramana Reddy <gtvrre...@gmail.com> wrote: >>> >>> Dear Kyriakos Zarifis, >>> Thanks for your reply. I tried using the following link >>> http://www.openflow.org/wk/index.php/OpenFlowVMS. >>> But when created using the scripts >>> (vms-create-disk.sh,vms-compile-kernel.sh), I failed to do that. >>> What is the system setup is needed to run these scripts. Does Mininet >>> supports wireless stuff? >>> >>> Thanks, >>> Ramana. >>> >>> >>> On Wed, Mar 9, 2011 at 3:41 PM, Kyriakos Zarifis <kyr.zari...@gmail.com> >>> wrote: >>>> >>>> Ramana, >>>> the instructions on that page are unfortunately pretty old, and the VM >>>> images provided there will not work with recent versions of NOX. For newer >>>> instructions please take a look at the wiki: >>>> >>>> http://noxrepo.org/noxwiki/index.php/Using_NOX#Setting_up_a_virtual_NOX.2FOpenflow_network >>>> The currently preferred method for setting up a virtual tested is >>>> Mininet. >>>> >>>> On Wed, Mar 9, 2011 at 2:01 AM, Ramana Reddy <gtvrre...@gmail.com> >>>> wrote: >>>>> >>>>> Does any one tried setting up a virtual Testing Environment. >>>>> It is working fine with me with the existing file system and kernel >>>>> binary from the following link: >>>>> http://noxrepo.org/manual/vm_environment.html >>>>> But when I created my own kernel.bin >>>>> (http://noxrepo.org/manual/vm_environment.html) in ubuntu 10.10, >>>>> it is giving kernel panic. Help in this regards is highly appreciated. >>>>> ( I used existing hda.dsk.gz from the above url) >>>>> >>>>> >>>>> VFS: Cannot open root device "hda1" or unknown-block(0,0) >>>>> Please append a correct "root=" boot option; here are the available >>>>> partitions: >>>>> Kernel panic - not syncing: VFS: Unable to mount root fs on >>>>> unknown-block(0,0) >>>>> Pid: 1, comm: swapper Tainted: G W 2.6.38-rc6+ #1 >>>>> Call Trace: >>>>> [<c120f5bb>] ? panic+0x50/0x13f >>>>> [<c1342b7b>] ? mount_block_root+0x1eb/0x1ff >>>>> [<c10a9590>] ? sys_mknod+0x13/0x15 >>>>> [<c1342bdb>] ? mount_root+0x4c/0x54 >>>>> [<c1342cf4>] ? prepare_namespace+0x111/0x138 >>>>> [<c13423d4>] ? kernel_init+0x17a/0x189 >>>>> [<c134225a>] ? kernel_init+0x0/0x189 >>>>> [<c1002c86>] ? kernel_thread_helper+0x6/0x10 >>>>> >>>>> Regards, >>>>> Ramana. >>>>> >>>>> >>>>> >>>>> _______________________________________________ >>>>> nox-dev mailing list >>>>> nox-dev@noxrepo.org >>>>> http://noxrepo.org/mailman/listinfo/nox-dev >>>>> >>>> >>> >> > > > _______________________________________________ > nox-dev mailing list > nox-dev@noxrepo.org > http://noxrepo.org/mailman/listinfo/nox-dev > > _______________________________________________ nox-dev mailing list nox-dev@noxrepo.org http://noxrepo.org/mailman/listinfo/nox-dev
