Srini Seetharaman <seethara <at> stanford.edu> writes: > > Looks like some other application is already using port 6633. Please > see if there are other NOX processes already running. To use a > different port XXXX, please run as follows: "./nox_core -i ptcp:XXXX" > > Srini. > > On Sun, Aug 14, 2011 at 5:13 PM, Mariam <08bicsemmuntaha <at> seecs.edu.pk> wrote: > > Hi! > > i'm coding layer-3 forwarder/switch controller but every time i run it i got > > following error > > 00042|nox|ERR:bind: Address already in use > > any ideas? > > > > _______________________________________________ > > nox-dev mailing list > > nox-dev <at> noxrepo.org > > http://noxrepo.org/mailman/listinfo/nox-dev > > > What i was doing is this " ./nox_core -v -i ptcp: pytutorial" I'm new to openflow and python so i don't understand it much..:( when i did "./nox_core -v -i ptcp:6635 pytutorial" then it made no difference and when i entred this "./nox_core -v -i ptcp:6635" then it just got stuck.
_______________________________________________ nox-dev mailing list nox-dev@noxrepo.org http://noxrepo.org/mailman/listinfo/nox-dev