Re: [nox-dev] NOX & Pronto 3290(2011.08.06)

[Min-Hyup KANG]

yes, you are right, it is error that it couldn't add a flow entry because the flow table was full. it is very strange.. Now, I checked flow table information through  switch CLI. Is this switch error ? CLI# flowtable  Flow table show ERROR: Status nil, operation did not complete. Error handing command flowtable. No flow table entries returned CLI#  --------- 원본 메일 --------- 보낸사람: Kyriakos Zarifis <kyr.zari...@gmail.com> 받는사람 : Min-Hyup KANG <kang-min-h...@hanmail.net> 참조 : NOX-dev <nox-dev@noxrepo.org>,openflow-indigo <openflow-ind...@lists.stanford.edu> 날짜: 2011년 9월 19일 월요일, 10시 01분 29초 +0900 제목: Re: [nox-dev] NOX & Pronto 3290(2011.08.06) I don't know much about Pronto, but this error is a message from the switch telling NOX that it couldn't add a flow entry because the flow table was full. Could that be the case indeed? 2011/9/19 Min-Hyup KANG <kang-min-h...@hanmail.net> Hi, All I'd like to know that it is  compatible between NOX(zaku or destiny) and Pronto 3290(2011.08.06 firmware). Currently, I can not operate Simplerouting etc. I don't know exactly why nox is having a below message. If you have any solution, please let me know. 00175|routeinstaller|DBG:Install flow entry port0007:vlanffff:pcp:0 mac84:2b:2b:60:26:6e->84:2b:2b:60:38:03 proto0800 ip192.168.10.11->192.168.10.10 port8->0 with 1 actions 00176|openflow-event|ERR:received Openflow error packet from dpid=111102aaaaaa: type=3, code=0, 80 bytes of data 00177|openflow-event|ERR:received Openflow error packet from dpid=111102aaaaaa: type=3, code=0, 80 bytes of data Best Regards, Min-Hyup KANG _______________________________________________ nox-dev mailing list nox-dev@noxrepo.org http://noxrepo.org/mailman/listinfo/nox-dev

Best Regards,
Min-Hyup KANG

_______________________________________________
nox-dev mailing list
nox-dev@noxrepo.org
http://noxrepo.org/mailman/listinfo/nox-dev