Resolved - patch will be pushed to destiny. Thanks wunyuan for pointing it out!
On Wed, Feb 8, 2012 at 6:22 PM, wunyuan <wuny...@nchc.narl.org.tw> wrote: > Dear Kyriakos Zarifis, > > In flow path, I keep client a and client b pinging each other. Then, I try > that, but it still has not changed. I attach two picture to show it. The > flowtrace1 is a graph after clicking trace button. The flowtrace2 is a > graph after zooming in on the topology. > > 於 2012/2/8 下午 05:03, Kyriakos Zarifis 提到: > > I haven't used the flowtracer tool in a long time, but just a first guess > (assuming that there is actually a flow setup on a path for the entry you > are tracing): I've noticed that in some system the graphics don't refresh > sometimes until you force them to refresh by, e.g. zooming in/out on the > topology. > Can you try that (just roll your mousewheel) and if anything changes? > > If that doesn't work, we can take the discussion offline and I can try > to replicate your error on my machine. > > On Wed, Feb 8, 2012 at 12:36 AM, wunyuan <wuny...@nchc.narl.org.tw>wrote: > >> Dear all, >> >> >> I build a testbed as follows: >> >> NOX >> / \ >> of1----of2 >> / \ >> a b >> I had fixed "ValueError: invalid literal for int() with base 16: >> '0xe4115b1251b4L' " with 64 bit version ubuntu. First, I start NOX and >> configure a and b to ping each other. Also, I run the nox-gui.py. Now, I >> select one flow entry from the nox-gui panel on the left and click the >> "Trace !" button but I can not see anything on the topology panel. What >> should I configure If i want to see flow on the topology panel? Thanks. >> >> Best regards, >> Wun-Yuan >> >> >> 於 2012/1/5 下午 03:07, wunyuan 提到: >> >> Dear all, >>> >>> I build a testbed as follows: >>> >>> NOX >>> / \ >>> of1----of2 >>> / \ >>> a b >>> Firstly, I set a and b to ping each other. Secondly, I input "./nox_core >>> -v -v -i ptcp:9550 routing lavi monitoring trackhost_pktin" to run the NOX. >>> and then start nox-gui. Thirdly, I click "FlowTracer" botton and then >>> double click of1 node on nox-gui to show its flow entries. Finally, I >>> highlight one entry and click "Trace!" botton. However,I cannot find any >>> flows on nox-gui and I find one error message. this error message is as >>> follows: >>> >>> File "~/nox/src/gui/views/flowtracer.py", line 95, in trace_flow >>> value = int(value,16) >>> ValueError: invalid literal for int() with base 16: '0xe4115b1251b4L' >>> >>> How could I fix it? >>> >>> >> >> -- >> >> =================================================================== >> 網路與資安組-黃文源(Wun-Yuan Huang) >> >> 財團法人國家實驗研究院 >> 國家高速網路與計算中心南部事業群 >> National Center for High-Performance Computing South Region Office >> 台南縣台南科學園區南科三路28號 >> No.28, Nan-Ke 3rd. Rd., Science-based Industrial Park, Tainan 744, >> Taiwan, R.O.C. >> TEL:06-5050940 ext.751 >> FAX:06-5050945 >> E-Mail:wuny...@nchc.narl.org.tw >> =================================================================== >> >> _______________________________________________ >> nox-dev mailing list >> nox-dev@noxrepo.org >> http://noxrepo.org/mailman/listinfo/nox-dev >> > > > > -- > > =================================================================== > 網路與資安組-黃文源(Wun-Yuan Huang) > 財團法人國家實驗研究院 > 國家高速網路與計算中心南部事業群 > National Center for High-Performance Computing South Region Office > 台南縣台南科學園區南科三路28號 > No.28, Nan-Ke 3rd. Rd., Science-based Industrial Park, Tainan 744, Taiwan, > R.O.C. > TEL:06-5050940 ext.751 > FAX:06-5050945 > E-Mail:wuny...@nchc.narl.org.tw > =================================================================== > >
_______________________________________________ nox-dev mailing list nox-dev@noxrepo.org http://noxrepo.org/mailman/listinfo/nox-dev