Hi all, I am simulating zrp but it ends with segmentation fault. Other protocols like AODV, DSR(with slight change in ifq) , TORA and DSDV are simulating properly with trace file. But only ZRP is not working. I manually made the changes in the ns-2 code where ever it is asked. If it would have problem with some code then it should be an error isnt it?
Anyway i am attaching my simulation result, script and code are the one which comes with the code from the cornel wnl site. I have not made changes to zrp code but made to ns-2.29. One more thing...i just replaced tcp sources to udp and no of nodes are 3. I think its problem with RAM. I am using 256 MB RAM so i need suggestion whether to buy more 256MB. If anyone has done this and has not worked can let me know. If anyone got success in doing so, please reply to share ok. Here is the result. I am also attaching gdb trace, even i tried with break points..but unable to figure out. It works fine in initial trace...but you proceed pointer location changes to 0x1 and there it stops by segmentation fault. In DSR also i had almost same trace but by changing ifq to CMUPriQueue it worked fine... I will be obliged to get information of any sort relating to zrp either solved or unsolved. Thanks For gdb trace see below. [EMAIL PROTECTED]:~/ns-allinone-2.29/ns-2.29> ns ~/ns_prac/wireless_4.tcl num_nodes is set 3 _ 0_ [0.000000] | Node 0 was created. ! Neighbor Table: empty ! LinkTable: empty ! Routes empty Periph[] INITIALIZE THE LIST xListHead _ 1_ [0.000000] | Node 1 was created. ! Neighbor Table: empty ! LinkTable: empty ! Routes empty Periph[] _ 2_ [0.000000] | Node 2 was created. ! Neighbor Table: empty ! LinkTable: empty ! Routes empty Periph[] Loading connection pattern... Loading scenario file... _ 0_ [0.001019] | Node 0 neighborscan-timer timed out, but neighbor table is empty. Next scan at 11.001019 sec.! Neighbor Table: empty ! LinkTable: empty ! Routes empty Periph[] . . . . _ 1_ [1.967914] | Node 1 received an ack (seq no. 1) from Node 0. | Node 1 added new neighbor Node 0, will expire at 16.967914 sec, lastack timer will expire at 3.967914 sec.| Node 1 sent update (seq no. 2) about new neighbor Node 0. ! Neighbor Table: 0 ! LinkTable: 0=1 ! Routes [0 1 ] Periph[] _ 0_ [2.062929] | Node 0 received update (seq no. 2) sent from Node 1 originating from Node 1 (contains: 1=0 ). | Node 0 forwarded update (seq no. 2) sent from Node 1 originating from Node 1 (contains: 1=0 ). ttl=4! Neighbor Table: empty ! LinkTable: 1=0 ! Routes [1 0 ] Periph[] Segmentation fault (core dumped) [EMAIL PROTECTED]:~/ns-allinone-2.29/ns-2.29> gdb -c core GNU gdb 6.3 Copyright 2004 Free Software Foundation, Inc. GDB is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions. Type "show copying" to see the conditions. There is absolutely no warranty for GDB. Type "show warranty" for details. This GDB was configured as "i586-suse-linux". (no debugging symbols found) Using host libthread_db library "/lib/tls/libthread_db.so.1". Core was generated by `ns /home/irfanjunedi/ns_prac/wireless_4.tcl'. Program terminated with signal 11, Segmentation fault. #0 0x0805b296 in ?? () (gdb) file ns Reading symbols from /home/irfanjunedi/ns-allinone-2.29/ns-2.29/ns...done. (gdb) bt #0 0x0805b296 in Packet::access (this=0x1, off=848) at packet.h:381 #1 0x08220321 in hdr_zrp::access (p=0x1) at zrp.h:112 #2 0x0821cdcb in ZRPAgent::do_update (this=0x86413a0) at zrp.cc:1123 #3 0x0821cfa7 in ZRPPeriodicUpdateTimer::handle (this=0x8641458, e=0x8641460) at zrp.cc:1110 #4 0x08053417 in Scheduler::dispatch (this=0x8476880, p=0x8641460, t=2.3974663605152173) at scheduler.cc:150 #5 0x08053442 in Scheduler::run (this=0x8476880) at scheduler.cc:129 #6 0x0805361b in Scheduler::command (this=0x8476880, argc=2, argv=0xbfbebab0) at scheduler.cc:198 #7 0x08269b74 in TclClass::dispatch_cmd () #8 0x0826d850 in OTclDispatch (cd=<value optimized out>, in=0x84542f8, argc=3, argv=0xbfbebafc) at otcl.c:434 #9 0x08271fd7 in TclInvokeStringCommand () #10 0x08273706 in TclEvalObjvInternal () #11 0x08299e3d in TclExecuteByteCode () #12 0x082a027c in TclCompEvalObj () #13 0x08299f25 in TclExecuteByteCode () #14 0x082a027c in TclCompEvalObj () #15 0x082c6ec9 in TclObjInterpProc () #16 0x082c7292 in TclProcInterpProc () #17 0x0826d999 in OTclDispatch (cd=<value optimized out>, in=0x84542f8, argc=2, argv=0xbfbec6ac) at otcl.c:477 #18 0x08271fd7 in TclInvokeStringCommand () #19 0x08273706 in TclEvalObjvInternal () #20 0x08299e3d in TclExecuteByteCode () #21 0x082a027c in TclCompEvalObj () #22 0x082c6ec9 in TclObjInterpProc () #23 0x082c7292 in TclProcInterpProc () #24 0x0826d850 in OTclDispatch (cd=<value optimized out>, in=0x84542f8, argc=2, argv=0xbfbecf7c) at otcl.c:434 #25 0x08271fd7 in TclInvokeStringCommand () #26 0x08273706 in TclEvalObjvInternal () #27 0x08274f66 in Tcl_EvalEx () #28 0x082b7373 in Tcl_FSEvalFile () #29 0x082ba506 in Tcl_Main () #30 0x0804cf17 in main (argc=2, argv=0xbfbed5f4) at tclAppInit.cc:67 (gdb) __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com