Two suggestions:
Call/invoke TCL from C, read the user manual and it provides examples of how to do that. Then you can use this command to change the rate. Alternatively, look for command method for CBR class and the associated C code for that class that handles "set interval"; then you should invoke similar code from the C code that determines when the network load is high or low. Best Regards Osama Farrag -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of leticia bela Sent: Tuesday, March 06, 2007 4:17 AM To: Aditya; ns-users@ISI.EDU Subject: [ns] Rate of CBR Traffic ? Hi aditya, when an event arrives suddenly for example the load of network is important, I will need to reduce the rate. at the beginning I do not have idea of the time of arrival of this event. thanks a lot Aditya <[EMAIL PROTECTED]> a écrit : Hii $ns at 1.0 "$cbr set interval_ 0.05" This will change the rate at 1.0 time instance. You can change it any number of times. Bye. On 3/6/07, leticia bela wrote: > yes that fix it statically. but how to dynamically change this rate during > simulation (dynamiquely). > Thanks a lot > > Aditya a écrit : > Hii > > $cbr set interval_ 0.05 > > This is how u can specify interval between 2 packets. > > I hope this wll solve ur problem. > > Regards > -- Aditya > > > > On 3/6/07, leticia bela wrote: > > > > Hi All, > > Could anyone please tell me how to change dynamiquely the rate of cbr > trafic under NS2 > > > > > > your help is highly appreciated, > > > > Regards > > > > ________________________________ > Découvrez une nouvelle façon d'obtenir des réponses à toutes vos questions > ! Profitez des connaissances, des opinions et des expériences des > internautes sur Yahoo! Questions/Réponses. > > --------------------------------- Découvrez une nouvelle façon d'obtenir des réponses à toutes vos questions ! Profitez des connaissances, des opinions et des expériences des internautes sur Yahoo! Questions/Réponses.