thanks, it is right.
Now the problem is, that the sd & rd files were created by the tcl script.
I wrote this command (exec ./etmp4 sd_a01 rd_a01 st_a01 a01.mp4 a01e) in the
proc "finish" of the tcl script.
So I got the message:
~/ns-allinone-2.34/ns-2.34/v1$ ns script1.tcl
9.9339999999999993
300 records
ns: finish: error opening sd_a01
while executing
"exec ./etmp4 -p -0 sd_a01 rd_a01 st_a01 a01.mp4 a01e"
(procedure "finish" line 6)
invoked from within
"finish"
On Tue, May 3, 2011 at 9:47 AM, fivos <fivos....@gmail.com> wrote:
> hi again Tami , the command you tried to write is wrong.
>
> exec etmp4 sd_a01 rd_a01 st_a01 a01.mp4 a01e needs to be :
>
> exec ./etmp4 sd_a01 rd_a01 st_a01 a01.mp4 a01e
>
> Good luck
>
> On Tue, May 3, 2011 at 11:11 AM, Tami Nesher <vessely...@gmail.com> wrote:
> >
> > Thanks.
> > from the console it returns:
> > ~/ns-allinone-2.34/ns-2.34/v1$ ./etmp4 sd_a01 rd_a01 st_a01 a01.mp4 a01e
> > usage: et -[p|f|F] -[0|x] [-c] <sd> <rd> <st> <in> <out> [PoB]
> > -[p|f|F] packet, frame or complete frame mode (alternative)
> > -[0|x] fill lost section with 0 or truncate (alternative)
> > [-c] use cumulative jitter in case of asynchronous clocks (optional)
> > <sd> tcpdump sender
> > <rd> tcpdump receiver
> > <st> trace-file sender
> > <in> transmitted video (original mp4)
> > <out> base name of output-file
> > [PoB] optional Play-out buffer size [ms]
> > the file a01.mp4 wasn't created..
> >
> >
> > On Tue, May 3, 2011 at 1:02 AM, pedro chaparro <pdr...@gmail.com> wrote:
> >
> >> is etmp4 in the same folder of the tcl script?? if you run th etmp4
> >> independently, i mean directly from console it runs without errors?
> >> bye
> >>
> >>
> >> 2011/5/3 Tami Nesher <vessely...@gmail.com>
> >>
> >>>
> >>> Hello, thanks for the answer.
> >>>
> >>> I tried already to write in "finish" proc : exec etmp4 sd_a01 rd_a01
> >>> st_a01
> >>> a01.mp4 a01e
> >>>
> >>> The etmp4 execution file located in the same folder as the tcl script
> >>> file.
> >>> sd_a01 and rd_a01 created by this tcl script, and located also in the
> same
> >>> folder.
> >>> st_a01 is the input file, located also in the same folder.
> >>>
> >>> and I got error :
> >>>
> >>> ~/ns-allinone-2.34/ns-2.34/v1$ ns script1.tcl
> >>> 9.9339999999999993
> >>> 300 records
> >>> ns: finish: couldn't execute "etmp4": no such file or directory
> >>> while executing
> >>> "exec etmp4 sd_a01 rd_a01 st_a01 a01.mp4 a01e"
> >>> (procedure "finish" line 6)
> >>> invoked from within
> >>> "finish"
> >>>
> >>>
> >>> On Sun, May 1, 2011 at 5:58 AM, fivos <fivos....@gmail.com> wrote:
> >>>
> >>> > yes you can run them. Check
> >>> > http://www.tcl.tk/man/tcl8.5/tutorial/Tcl26.html
> >>> >
> >>> > On Sun, May 1, 2011 at 11:06 AM, Tami Nesher <vessely...@gmail.com>
> >>> wrote:
> >>> > >
> >>> > > Hi,
> >>> > > I am asking about the example in the link:
> >>> > > http://140.116.72.80/~smallko/ns2/myevalvid2.htm
> >>> > > I want to know if I can run the commands like ./etmp4 .... etc in
> the
> >>> > tcl
> >>> > > file?
> >>> > > I need that the correct video will be the *output* of the *tcl*
> file.
> >>> > > Thanks.
> >>> > >
> >>> >
> >>>
> >>>
> >>>
> >>> --
> >>> רבי משה בן מכיר זצ"ל, מגדולי הראשונים כתב:
> >>> מי שאומר את ברכת "אשר יצר" בכוונה, ומוציא כל מילה מפיו בקול רם וברור,
> לא
> >>> יבוא עליו שום חולי שבעולם, ולא יזדקק כלל לרופאים או לתרופות!
> >>>
> >>
> >>
> >>
> >> --
> >> Pedro Alonso Chaparro Valero R&D Engineer
> >> Ciudad Politecnica de la Innovación
> >> iTEAM - Mobile Communications Group
> >> Polytechnic University of Valencia
> >> C\ Camino de Vera S/N, Edificio 8G
> >> 46022 Valencia, Spain
> >>
> >
> >
> >
> > --
> > רבי משה בן מכיר זצ"ל, מגדולי הראשונים כתב:
> > מי שאומר את ברכת "אשר יצר" בכוונה, ומוציא כל מילה מפיו בקול רם וברור, לא
> > יבוא עליו שום חולי שבעולם, ולא יזדקק כלל לרופאים או לתרופות!
> >
>
--
רבי משה בן מכיר זצ"ל, מגדולי הראשונים כתב:
מי שאומר את ברכת "אשר יצר" בכוונה, ומוציא כל מילה מפיו בקול רם וברור, לא
יבוא עליו שום חולי שבעולם, ולא יזדקק כלל לרופאים או לתרופות!
