Thanks Martin. So you had to make a change to the BSP? Can you send me your BSP file and maybe I can update it with 3.5 screen?
--- In nsbasic...@yahoogroups.com, "bwolodko" <ben.wolo...@...> wrote: > > --- In nsbasic...@yahoogroups.com, "martinnossel" <martinnossel@> wrote: > > > > I have got a NSBasic program (on flash) working on the Friendly Arm S3C2440 > > (but with a 7" screen) on bootup. > > > > I would have to recompile the BSB for a 3.5". for you as I put the NSBasic > > runtime into the BSP to install in the flash. I only have the demo PB > > though, and it will take me awhile to get to it I'm afraid. > > > > Chase me up in a week (or 2). > > > > Martin > > > > --- In nsbasic...@yahoogroups.com, "cyberscan" <kurt@> wrote: > > > > > > --- In nsbasic...@yahoogroups.com, "bwolodko" <ben.wolodko@> wrote: > > > > > > > > --- In nsbasic...@yahoogroups.com, "cyberscan" <kurt@> wrote: > > > > > > > > > > --- In nsbasic...@yahoogroups.com, "bwolodko" <ben.wolodko@> wrote: > > > > > > > > > > > > --- In nsbasic...@yahoogroups.com, "cyberscan" <kurt@> wrote: > > > > > > > > > > > > > > > > > > > > > > > > > > > > --- In nsbasic...@yahoogroups.com, "bwolodko" <ben.wolodko@> > > > > > > > wrote: > > > > > > > > > > > > > > > > --- In nsbasic...@yahoogroups.com, "cyberscan" kurt@ wrote: > > > > > > > > > > > > > > > > > > Can someone help me configure an SD card to auto boot my > > > > > > > > > NSbasic app > > > > > > > on power up? I'm running WinCE 5.0. Thanks. > > > > > > > > > > > > > > > > > > > > > > > > > Depending on the target device, place your NSBasic generated > > > > > > > > EXE file > > > > > > > ( only one ) into a folder named AutoRun > > > > > > > > > > > > > > > > On the CuWin3500 the SD card is presented as > > > > > > > > > > > > > > > > Storage Card > > > > > > > > > > > > > > > > so if I place an EXE file ( only one ) in the > > > > > > > > > > > > > > > > Storage Card\Autorun > > > > > > > > > > > > > > > > folder, it will run upon booting as long as the Autorun dip > > > > > > > > switch is > > > > > > > set to enable. > > > > > > > > > > > > > > > > Other hardware will have it's own protocols for Autorun > > > > > > > > > > > > > > > > On the CuWin3500 there is a dip switch that has to be set to > > > > > > > > enable > > > > > > > the Autorun feature. > > > > > > > > > > > > > > > Thanks. When I try that, it comes up with an error "Cannot find > > > > > > > NSBasic.exe. Please reinstall." Do I need to put NSBasic.exe > > > > > > > somewhere? > > > > > > > > > > > > > > > > > > > You have to install the NSBasic runtime onto the target device, the > > > > > > NSBasic Installer should be doing this. > > > > > > > > > > > > > > > > > > Typically the NSBasic Runtime is copied to the target into the > > > > > > Flash Disk\Windows subdirectory, and then you have to "Save > > > > > > Registry" after copying/installing to that location. > > > > > > > > > > > > I am currently using NSBasic 7.05c, not version 8.02. > > > > > > > > > > > > George may have to jump in here. > > > > > > > > > > > Thanks. Makes sense. How do I "save the registry?" > > > > > > > > > > > > > Typically the Windows CE device comes with an icon on the CE desktop > > > > that is "Save Registry" > > > > > > > > If not on your desktop, I'd do a search, may be in Program files, or an > > > > exe in the Windows sub. > > > > > > > > The two CE devices I work with, both have a "Save Registry" icon on the > > > > desktop. > > > > > > > > What is the model of your CE device? > > > > > > > It's a Friendly Arm S3C2440 with 3.5" LCD. > > > > > > > The Friendly ARM S3C2440 with a 7" screen is a very well priced and > functional unit. The manuals are tough to read, in that the verbage is > English, but the screen shots are in Chinese. > > Is it legal to post the BSP for the 7" screen in the Files section? > > What version of NSBasic runtime are you using? > Any issues? with memory leaks? > > Ben > --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "nsb-ce" group. To post to this group, send email to nsb-ce@googlegroups.com To unsubscribe from this group, send email to nsb-ce+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/nsb-ce?hl=en -~----------~----~----~----~------~----~------~--~---