Hi Ben, I'm sorry - none of your emails came to our support email address.
Our address is : NS BASIC Corporation 71 Hill Crescent Toronto, Canada M1M 1J3 416 264-5999 All of the major couriers deliver here regularly. George Henne NS BASIC Corporation http://www.nsbasic.com >Hi George, Thankyou for the offer. I have sent several emails to >supp...@nsbasic.com without any replys. > >All I need is an address, and a choice of courier, and I will send you a unit. > >Thanks again > >Ben > >--- In nsbasic-ce@yahoogroups.com, "George Henne" <g...@...> wrote: >> >> It sounds like you have done all the right things. >> >> Is there any chance you can loan us the device for a day? If so, contact >> support @ nsbasic.com directly, and we will make the arrangements. >> >> George Henne >> NS BASIC Corporation >> http://www.nsbasic.com >> >> >I have purchased the latest CuWin5500, HMI device running Windows >> Embedded 6.0 >> > >> >http://www.cubloc.com/product/06_02.php >> > >> >I have downloaded NSBasic 8.20a, using my Serial , updating from 7.05b >> > >> >Everything seems to install/load OK. No error messages >> > >> >on the NSBasic IDE choose Tools>Options>Installer>Get Device Info shows >> > >> >Device processor Type 2577: >> >Device Type: SMDK2450 Board >> >Device OEM Info: Samsung Electronics >> >Device Version: 6 >> > >> >I have selected the Platform >> > >> >2577 - ARMV4/StrongARM/SA1100 >> > >> >Wanted to try running an NSBasic program, the Benchmark.nsb >> > >> >Active sync 4.5 connects, I am able to explore the CuWin5500, >> > >> >No error messages at all when uploading or running a program, >> > >> >but all I get is a Blank light gray screen, "X" in upper Right corner, a >> >tab created on the bottom with the name of the program, plus the rest of >> >the task bar icons , start button, etc. >> > >> >The unit is not lock up because I can open control panel etc. while the >> >blank screen is being shown. >> > >> >The only screen item in the Benchmark.nsb program is a Message Box, but >> >this does not show on the screen of the CuWin5500. >> > >> >I Have used NSBasic v 7.05b to program the CuWin3500, ab earlier version >> >of the device, which has CE5.0 installed. Worked very well. >> > >> >In thinking about this, I concluded that the controls were not being >> >registered. >> >It would seem that Windows CE6.0 does not use "regsvrce.exe" to register >> >the controls. >> > >> >I tried to run >> > >> >ShellExecute "open","regsvrce.exe","\Flash Disk\NSB BASIC\nsbasic >> >\MSCEComm.dll" >> > >> >ShellExecute "open","regsvrce.exe","\Flash Disk\NSB BASIC\nsbasic >> >\MSCEComDlg.dll" >> > >> >ShellExecute "open","regsvrce.exe","\Flash Disk\NSB BASIC\nsbasic >> >\MSCEFile.dll" >> > >> >ShellExecute "open","regsvrce.exe","\Flash Disk\NSB BASIC\nsbasic >> >\NSCEPictureBox.ocx" >> > >> >ShellExecute "open","regsvrce.exe","\Flash Disk\NSB BASIC\nsbasic >> >\newObjectsPack1.dll" >> > >> >ShellExecute "open","regsvrce.exe","\Flash Disk\NSB BASIC\nsbasic >> >\NSBComDlg.dll" >> > >> >ShellExecute "open","regsvrce.exe","\Flash Disk\NSB BASIC\nsbasic >> >\NSBControls.dll" >> > >> >ShellExecute "open","regsvrce.exe","\Flash Disk\NSB BASIC\nsbasic >> >\SerialCE.dll" >> > >> >ShellExecute "open","regsvrce.exe","\Flash Disk\NSB BASIC\nsbasic >> \DialogX.ocx" >> > >> >ShellExecute "open","regsvrce.exe","\Flash Disk\NSB BASIC\nsbasic >> >\vbscript.dll" >> > >> >ShellExecute "open","regsvrce.exe","\Flash Disk\NSB BASIC\nsbasic >> >\NSBWin32.dll" >> > >> >Bye >> > >> >Browsing the files on the CuWin5500, I did not find the file >> >"regsvrce.exe" >> > >> >So I am at a bit of a loss, NSBasic 8.02a should not require an >> >installed runtime on the device, and should have the ability to register >> >any controls >> > >> >Any assistance is appreciated >> > >> >Ben >> > >> > >> > >> > >> >------------------------------------ >> > >> >Yahoo! Groups Links >> > >> > >> > >> > > > > >------------------------------------ > >Yahoo! Groups Links > > > -- You received this message because you are subscribed to the Google Groups "nsb-ce" group. To post to this group, send email to nsb...@googlegroups.com. To unsubscribe from this group, send email to nsb-ce+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/nsb-ce?hl=en.