Looks like it was just a small oversight on my part; I had to make sure I
added a corresponding \s!btx:\s!list:\s!author:invertedfirst setup for list
entries. Here's what finally works:
```
\startsetups \s!btx:\s!cite:\s!author:invertedfirst
\ifnum\currentbtxauthorindex>\plusone
\fastsetup{\s!btx:\s!cite:\s!author:normal}
\else
\fastsetup{\s!btx:\s!cite:\s!author:inverted}
\fi
\stopsetups
...
\startsetups \s!btx:\s!list:\s!author:invertedfirst
\ifnum\currentbtxauthorindex>\plusone
\fastsetup{\s!btx:\s!list:\s!author:normal}
\else
\fastsetup{\s!btx:\s!list:\s!author:inverted}
\fi
\stopsetups
```
Thanks again, Hans!
Joey
On Wed, Sep 15, 2021 at 10:13 AM Joey McCollum <jmccollum20140...@gmail.com>
wrote:
> Good suggestion! I removed my changes to publ-aut.lua for now and tried
> adding each of the two setups you described to publ-imp-author.mkvi (where
> it seemed to fit best). But simply specifying
>
> ```
> \definebtx
> [sbl:\s!list:author]
> [sbl:\s!list]
> [\c!authorconversion=invertedfirst]
> ```
>
> in my custom rendering file does not access the invertedfirst setup,
> regardless of which of the two setups I use. Do I have to do something
> different to access it?
>
> Thanks!
>
> On Wed, Sep 15, 2021 at 4:18 AM Hans Hagen <j.ha...@xs4all.nl> wrote:
>
>> On 9/15/2021 5:06 AM, Joey McCollum via ntg-context wrote:
>> > All right, I figured out where I needed to make this change for it to
>> > take effect. The relevant script is publ-aut.lua. The code I needed to
>> > change was for the "oneauthor" function definition, which itself is
>> > located in the "btxauthor" function definition. My changes are detailed
>> > below:
>>
>> did you try to stay at the tex end? like:
>>
>> % \startsetups \s!btx:\s!cite:\s!author:invertedfirst
>> % \ifnum\currentbtxauthorindex>\plusone
>> % \btxsetauthorvariant{inverted}
>> % \else
>> % \btxsetauthorvariant{normal}
>> % \fi
>> % \fastsetup{\s!btx:\s!cite:\s!author:\btxauthorvariant}
>> % \stopsetups
>>
>> \startsetups \s!btx:\s!cite:\s!author:invertedfirst
>> \ifnum\currentbtxauthorindex>\plusone
>> \fastsetup{\s!btx:\s!cite:\s!author:inverted}
>> \else
>> \fastsetup{\s!btx:\s!cite:\s!author:normal}
>> \fi
>> \stopsetups
>>
>>
>>
>> > ```
>> > local function oneauthor(i,last,justone)
>> > local author = split[i]
>> > if index then
>> > ctx_btxstartauthor(i,1,0)
>> > elseif last then
>> > ctx_btxstartauthor(i,1,0)
>> > ctx_btxsetconcat(0)
>> > if combiner == "invertedfirst" then
>> > if i == 1 then
>> > ctx_btxsetauthorvariant("inverted")
>> > else
>> > ctx_btxsetauthorvariant("normal")
>> > end
>> > else
>> > ctx_btxsetauthorvariant(combiner)
>> > end
>> > else
>> > local state = author.state or 0
>> > ctx_btxstartauthor(i,max,state)
>> > ctx_btxsetconcat(concatstate(i,max))
>> > if combiner == "invertedfirst" then
>> > if i == 1 then
>> > ctx_btxsetauthorvariant("inverted")
>> > else
>> > ctx_btxsetauthorvariant("normal")
>> > end
>> > else
>> > ctx_btxsetauthorvariant(combiner)
>> > end
>> > end
>> > local initials = author.initials
>> > if initials and #initials > 0 then
>> > ctx_btxsetinitials() --
>> > (concat(the_initials(initials,symbol)," "))
>> > end
>> > local firstnames = author.firstnames
>> > if firstnames and #firstnames > 0 then
>> > ctx_btxsetfirstnames() -- (concat(firstnames," "))
>> > end
>> > local vons = author.vons
>> > if vons and #vons > 0 then
>> > ctx_btxsetvons() -- (concat(vons," "))
>> > end
>> > local surnames = author.surnames
>> > if surnames and #surnames > 0 then
>> > ctx_btxsetsurnames() -- (concat(surnames," "))
>> > end
>> > local juniors = author.juniors
>> > if juniors and #juniors > 0 then
>> > ctx_btxsetjuniors() -- (concat(juniors," "))
>> > end
>> > if not index and i == max then
>> > if split.others then
>> > ctx_btxsetoverflow(1)
>> > else
>> > local overflow = #split - max
>> > if overflow > 0 then
>> > ctx_btxsetoverflow(overflow)
>> > end
>> > end
>> > end
>> > if combiner == "invertedfirst" then
>> > if i == 1 then
>> > ctx_btxsetup("inverted")
>> > else
>> > ctx_btxsetup("normal")
>> > end
>> > else
>> > ctx_btxsetup(combiner)
>> > end
>> > ctx_btxstopauthor()
>> > end
>> > ```
>> >
>> > I'll admit that the addition of entire if-else blocks around whether or
>> > not the combiner is a specific value may not be the best practice in
>> > terms of future maintenance (especially if similar index-dependent
>> > authorconversions are needed in the future). Alternatively, the
>> > "btxauthor" function could populate a "combiners" array of length "max"
>> > with a specific authorconversion for each author in the split; for most
>> > authorconversions, all entries in this array would be the same, but for
>> > authorconversions like "invertedfirst", the first entry would be
>> > different from the rest. Then, the "oneauthor" function could just
>> > reference combiners[i] instead of combiner.
>> >
>> > Joey
>> >
>> > On Fri, Sep 3, 2021 at 10:48 PM Joey McCollum
>> > <jmccollum20140...@gmail.com <mailto:jmccollum20140...@gmail.com>>
>> wrote:
>> >
>> > Hi,
>> >
>> > I mentioned this in an earlier e-mail but thought that now might be
>> > a good time to describe this issue in detail. I'd like to define a
>> > new authorconversion that renders the first author in a list
>> > differently than the remaining authors in the list. Specifically,
>> > I'd like to use the "inverted" authorconversion for the first author
>> > and the "normal" authorconversion for the rest.
>> >
>> > In the newer bibl-bib.lua file, I can see what I might have to
>> > modify to accomplish this (I added the if combiner ==
>> > "invertedfirst" block):
>> >
>> > ```
>> > function authors.concat(author,combiner,what,settings)
>> > if type(combiner) == "string" then
>> > combiner = authors[combiner or "normal"] or authors.normal
>> > end
>> > local split = splitauthors(author)
>> > local setting = settings[what]
>> > local etallimit, etaldisplay, etaltext = 1000, 1000, ""
>> > if setting then
>> > etallimit = settings.etallimit or 1000
>> > etaldisplay = settings.etaldisplay or etallimit
>> > etalltext = settings.etaltext or ""
>> > end
>> > local max = #split
>> > if max > etallimit and etaldisplay < max then
>> > max = etaldisplay
>> > end
>> > if combiner == "invertedfirst" then
>> > for i=1,max do
>> > if i == 1 then
>> > split[i] = authors.inverted(split[i],settings)
>> > else
>> > split[i] = authors.normal(split[i],settings)
>> > end
>> >
>> > end
>> > else
>> > for i=1,max do
>> > split[i] = combiner(split[i],settings)
>> > end
>> > end
>> > local result = bibtexconcat(split,settings)
>> > if max < #split then
>> > return result
>> > else
>> > return result .. etaltext
>> > end
>> > end
>> > ```
>> >
>> > Unfortunately, this doesn't seem to do anything. It's not clear to
>> > me how bibl-bib.lua and bibl-bib.mkiv are being used by the other
>> > publication support modules, if they're being used at all
>> > (publ-ini.mkiv doesn't appear to register it, anyway). Is there
>> > another file I'd have to change to make "invertedfirst" a working
>> > authorconversion? Is there a similar block of code in publ-ini.lua
>> > where I should be implementing this change instead?
>> >
>> > Thanks!
>> >
>> > Joey
>> >
>> >
>> >
>> ___________________________________________________________________________________
>> > If your question is of interest to others as well, please add an entry
>> to the Wiki!
>> >
>> > maillist : ntg-context@ntg.nl /
>> http://www.ntg.nl/mailman/listinfo/ntg-context
>> > webpage : http://www.pragma-ade.nl / http://context.aanhet.net
>> > archive : https://bitbucket.org/phg/context-mirror/commits/
>> > wiki : http://contextgarden.net
>> >
>> ___________________________________________________________________________________
>> >
>>
>>
>> --
>>
>> -----------------------------------------------------------------
>> Hans Hagen | PRAGMA ADE
>> Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
>> tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl
>> -----------------------------------------------------------------
>>
>
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the
Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
