| New to ntop and netflow. Yes another one. Anyway, I have a couple of questions as I try and get this running. First, does each router that I receive netflow from use a different port? I set the second one up tonight and am not getting any thing from it. Looking at the router, flows have stopped. Second, we are a wireless ISP and I am wanting to monitor each access point on a tower. The 3 access points (sectors) are configured as bridges with an assigned private space IP address. These are bridges between the customer's cpe and the gateway and the gateway has a primary and secondary address on it. One is the private space address and the other is the public space in the same subnet as the customer's equipment. Rather than monitor the gateway router, I would like to monitor the three APs separately. But this doesn't seem to work. The way I have tried it is to enter the three sectors as netflow devices, same port (one of the reasons for the above question), IP address of 10.x.x.1 or 2 or 3, same subnet. On the bridge, I set the interface as the bridge interface. I receive info from only one of the sectors. So, how do I set this up so I can see info from the three sectors? Thanks, Terri Kelley Network Engineer 254-697-6710  This email message is intended only for the named recipient(s) above, and may contain, together with any attachment(s), confidential information that is privileged. If you are not the intended recipient, be advised that you have received this email in error and that any use, dissemination, forwarding, printing, copying or distribution of this message and any attachment(s) is strictly prohibited. |
_______________________________________________ Ntop-misc mailing list [email protected] http://listgateway.unipi.it/mailman/listinfo/ntop-misc
