Did you install the pfring_dna daq module? It is not listed in your /usr/local/lib/daq
Alfredo On 27 May 2014, at 19:10, Maurizio Di Pietro (Esterna) <[email protected]> wrote: > Now I’m running a more simple command for a test. I had the same problem > > /usr/local/bin/snort -c > /usr/src/PF_RING-6.0.1/userland/snort/snort-2.9.6.0/etc/snort.conf --daq-dir > /usr/local/lib/daq --pid-path=/tmp/snort0 --daq pfring_dna --daq-mode > passive -i dna0 -v –e > > ERROR: Can't find pfring_dna DAQ! > Fatal Error, Quitting.. > > I didn't understand > > Below I wrote my configuration > > ]# lsmod > Module Size Used by > ixgbe 310387 0 > pf_ring 436931 24 > > > ]# ifconfig > dna0 Link encap:Ethernet HWaddr EC:9E:CD:0D:F1:44 > UP BROADCAST RUNNING MULTICAST MTU:9000 Metric:1 > RX packets:0 errors:0 dropped:0 overruns:0 frame:0 > TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:1000 > RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) > Memory:fb120000-fb140000 > > dna1 Link encap:Ethernet HWaddr EC:9E:CD:0D:F1:45 > UP BROADCAST RUNNING MULTICAST MTU:9000 Metric:1 > RX packets:0 errors:0 dropped:0 overruns:0 frame:0 > TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:1000 > RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) > Memory:fb100000-fb120000 > > > ls -la /usr/local/lib/daq/ > totale 236 > drwxr-xr-x 2 root root 4096 23 mag 15:32 . > drwxr-xr-x. 8 root root 4096 23 mag 15:30 .. > -rwxr-xr-x 1 root root 1000 23 mag 15:30 daq_afpacket.la > -rwxr-xr-x 1 root root 51455 23 mag 15:30 daq_afpacket.so > -rwxr-xr-x 1 root root 956 23 mag 15:30 daq_dump.la > -rwxr-xr-x 1 root root 25374 23 mag 15:30 daq_dump.so > -rwxr-xr-x 1 root root 976 23 mag 15:30 daq_ipfw.la > -rwxr-xr-x 1 root root 28191 23 mag 15:30 daq_ipfw.so > -rwxr-xr-x 1 root root 956 23 mag 15:30 daq_pcap.la > -rwxr-xr-x 1 root root 30084 23 mag 15:30 daq_pcap.so > -rwxr-xr-x 1 root root 963 23 mag 15:32 daq_pfring.la > -rwxr-xr-x 1 root root 66833 23 mag 15:32 daq_pfring.so > > > > > Thanks > Maurizio > > > > > > > > Da: [email protected] > [mailto:[email protected]] Per conto di Alfredo > Cardigliano > Inviato: martedì 27 maggio 2014 18:35 > A: [email protected] > Oggetto: Re: [Ntop-misc] DNA DAQ for SNORT > > Hi Maurizio > —daq-var clusterid is not supported by the pfring_dna daq, please also make > sure pf_ring is loaded and the dna0 interface is up. Please let us know. > > Best Regards > Alfredo > > On 27 May 2014, at 17:54, Maurizio Di Pietro (Esterna) <[email protected]> > wrote: > > > Hello, > I'm working with snort and DAQ PRING 6.01 less DNA. > I ran more istance of snort with this command and it works well > > /usr/local/bin/snort -c > /usr/src/PF_RING-6.0.1/userland/snort/snort-2.9.6.0/etc/snort.conf > --pid-path=/tmp/snort0 -i eth10 -l /tmp/snort0 --perfmon-file > /tmp/snort0/snort.stats --daq-dir /usr/local/lib/daq --daq pfring --daq-var > bindcpu=0 --daq-var clusterid=16 > > Now I'm trying to use the feature z-copy (DNA). So i compiled the ixgbe DNA > driver, i loaded it and tryed to run snort with this command > > /usr/local/bin/snort -c > /usr/src/PF_RING-6.0.1/userland/snort/snort-2.9.6.0/etc/snort.conf > --pid-path=/tmp/snort0 -i dna0 -l /tmp/snort0 --perfmon-file > /tmp/snort0/snort.stats --daq-dir /usr/local/lib/daq --daq pfring_dna > --daq-var bindcpu=0 --daq-var clusterid=16 > > But I have this output > > pfring DAQ configured to passive. > ERROR: Can't initialize DAQ pfring (-1) - > Fatal Error, Quitting.. > > > Why? > 1- Do i have a license for work with DNA DAQ? > 2- must I use PF_RING_aware? > 3- Do I make some mistakes? > > pfcount and pfsend work well! > Thanks > Bye > > _______________________________________________ > Ntop-misc mailing list > [email protected] > http://listgateway.unipi.it/mailman/listinfo/ntop-misc > > _______________________________________________ > Ntop-misc mailing list > [email protected] > http://listgateway.unipi.it/mailman/listinfo/ntop-misc
_______________________________________________ Ntop-misc mailing list [email protected] http://listgateway.unipi.it/mailman/listinfo/ntop-misc
