Ivan can you please check if during capture the interface is in promiscuous mode (you can check it with ifconfig). All the rest looks good to me.
Cheers Luca On 19 Aug 2014, at 13:13, Ivan Petrov <[email protected]> wrote: > I've just noticed that there has been a change in rx's : > > sudo ethtool -S dna0 > NIC statistics: > rx_packets: 1120 > tx_packets: 0 > rx_bytes: 91790 > tx_bytes: 0 > rx_broadcast: 635 > tx_broadcast: 0 > rx_multicast: 485 > tx_multicast: 0 > rx_errors: 0 > tx_errors: 0 > tx_dropped: 0 > multicast: 485 > collisions: 0 > rx_length_errors: 0 > rx_over_errors: 0 > rx_crc_errors: 0 > rx_frame_errors: 0 > rx_no_buffer_count: 0 > rx_missed_errors: 0 > tx_aborted_errors: 0 > tx_carrier_errors: 0 > tx_fifo_errors: 0 > tx_heartbeat_errors: 0 > tx_window_errors: 0 > tx_abort_late_coll: 0 > tx_deferred_ok: 0 > tx_single_coll_ok: 0 > tx_multi_coll_ok: 0 > tx_timeout_count: 0 > tx_restart_queue: 0 > rx_long_length_errors: 0 > rx_short_length_errors: 0 > rx_align_errors: 0 > tx_tcp_seg_good: 0 > tx_tcp_seg_failed: 0 > rx_flow_control_xon: 0 > rx_flow_control_xoff: 0 > tx_flow_control_xon: 0 > tx_flow_control_xoff: 0 > rx_csum_offload_good: 0 > rx_csum_offload_errors: 0 > rx_header_split: 0 > alloc_rx_buff_failed: 0 > tx_smbus: 0 > rx_smbus: 0 > dropped_smbus: 0 > rx_dma_failed: 0 > tx_dma_failed: 0 > rx_hwtstamp_cleared: 0 > uncorr_ecc_errors: 0 > corr_ecc_errors: 0 > > > On Tuesday, August 19, 2014 12:47 PM, Ivan Petrov <[email protected]> wrote: > > > Is the last line okay? > > ifconfig dna0 > dna0 Link encap:Ethernet HWaddr 00:1E:4F:48:03:2A > inet addr:192.168.0.106 Bcast:192.168.0.255 Mask:255.255.255.0 > inet6 addr: fe80::21e:4fff:fe48:32a/64 Scope:Link > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > RX packets:0 errors:0 dropped:0 overruns:0 frame:0 > TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:1000 > RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) > Interrupt:21 Memory:fe9e0000-fea00000 > > > On Tuesday, August 19, 2014 7:58 AM, Luca Deri <[email protected]> wrote: > > > Ivan > Can you please send the output of ethtool -S dnaX ? > > Thanks Luca > > Sent from my iPhone (sorry for typos) > > On 19/ago/2014, at 07:11, Ivan Petrov <[email protected]> wrote: > >> Hi Luca, >> >> I've loaded indeed the driver via the script. Also don't get any errors. >> >> Regards, >> Hristo >> >> >> On Tuesday, August 19, 2014 6:50 AM, Luca Deri <[email protected]> wrote: >> >> >> Hi >> Did you load perhaps the driver with multiple queues? Please use the load >> script we provide in the src/ directory of each driver >> >> Regards Luca >> >> Sent from my iPhone (sorry for typos) >> >> On 18/ago/2014, at 13:44, Ivan Petrov <[email protected]> wrote: >> >>> Hi, >>> >>> I've a problem with my dna interface. >>> >>> I've downloaded pf_ring from the svn and i've loaded the driver, >>> e1000e-2.5.4-DNA without any errors. But the only packets that tcpdump is >>> able to capture is arp request to my router... >>> >>> Could you please advise? >>> >>> Here is some info: >>> >>> #uname -a >>> Linux 2.6.32-431.23.3.el6.i686 #1 SMP Thu Jul 31 14:37:53 UTC 2014 i686 >>> i686 i386 GNU/Linux >>> Centos 6.5 >>> >>> #sudo ethtool --show-ntuple dna0 >>> Cannot get RX rings: Operation not supported >>> rxclass: Cannot get RX class rule count: Operation not supported >>> RX classification rule retrieval failed >>> >>> #ethtool -i dna0 >>> driver: e1000e >>> version: 2.5.4-DNA >>> firmware-version: 1.1-1 >>> bus-info: 0000:00:19.0 >>> supports-statistics: yes >>> supports-test: yes >>> supports-eeprom-access: yes >>> supports-register-dump: yes >>> supports-priv-flags: no >>> >>> #ethtool -g dna0 >>> Ring parameters for dna0: >>> Pre-set maximums: >>> RX: 4096 >>> RX Mini: 0 >>> RX Jumbo: 0 >>> TX: 4096 >>> Current hardware settings: >>> RX: 256 >>> RX Mini: 0 >>> RX Jumbo: 0 >>> TX: 256 >>> >>> Kind regards, >>> >>> Ivan >>> >>> >>> >>> _______________________________________________ >>> Ntop-misc mailing list >>> [email protected] >>> http://listgateway.unipi.it/mailman/listinfo/ntop-misc >> >> > > > >
_______________________________________________ Ntop-misc mailing list [email protected] http://listgateway.unipi.it/mailman/listinfo/ntop-misc
