Yes sure, the switch I'd like to connect to is obviously different than the one that ntopng is connected to. I am sorry for the misunderstanding. I wonder if you can propose a way that helps me to do so. Thank you. Regards, Farah ________________________________ From: [email protected] <[email protected]> on behalf of Ramzi Abdallah <[email protected]> Sent: Thursday, September 25, 2014 12:38:08 PM To: [email protected] Subject: Re: [Ntop-misc] Problems in sending data using nprobe
Do you mean you want to want to connect nprobe to a mirrored port on a remote switch other than the one you have ntopng connected to and makes it log received packets to the ntopng server? From: [email protected] [mailto:[email protected]] On Behalf Of Farah Braiteh (Student) Sent: Thursday, September 25, 2014 12:31 PM To: [email protected] Subject: [Ntop-misc] Problems in sending data using nprobe Helllo, The PC, where Ntopng is installed, is connected to two networks: 1. Monitoring network: connected to the switch where port mirroring is 2. Managing Network (My IP address is 192.168.1.169) *************** * * Monitoring ************ * *------------------> * Switch * * Ntopng * (Network 1) ************ * * (Port mirroring) * * * * * * Management; My IP: 192.168.1.169 * *------------------> * * (Network 2) * * *************** The above network is working successfully; the data received by the switch is collected by ntopng and can be seen. How can I send data from nprobe to the switch I have above, so that ntopng can collect the data to be sent? Thank you. Regards, Farah
_______________________________________________ Ntop-misc mailing list [email protected] http://listgateway.unipi.it/mailman/listinfo/ntop-misc
