Hi Yuri, I am starting and stopping it within the GUI. It all starts up OK, but it only reports traffic directed at the server itself (my client connecting) and broadcast traffic on its subnet.
Regards, Matt On 30 May 2015 at 11:00, <[email protected]> wrote: > Send Ntop-misc mailing list submissions to > [email protected] > > To subscribe or unsubscribe via the World Wide Web, visit > http://listgateway.unipi.it/mailman/listinfo/ntop-misc > or, via email, send a message with subject or body 'help' to > [email protected] > > You can reach the person managing the list at > [email protected] > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Ntop-misc digest..." > > Today's Topics: > > 1. nProbe configuration (Matt Thompson) > 2. Re: nProbe configuration (Yuri Francalacci) > > > ---------- Forwarded message ---------- > From: Matt Thompson <[email protected]> > To: [email protected] > Cc: > Date: Fri, 29 May 2015 14:49:05 +0100 > Subject: [Ntop-misc] nProbe configuration > I'm hoping somebody can help what is probably a simple issue. > > I have installed the trial licence successfully but am struggling to > configure ntop/nprobe to get useful data, despite following the > documentation and some related YouTube videos. > > I have a simple setup: > > (Firewall 1) > > <> > > (Firewall 2) > > <> > > (Ntop/nprobe installation server) > > > Firewall 1 is where I have Netflow exporting configured. The server has > all the relevant roles installed on the one box. Firewall 2 has all > relevant traffic allowed through it, but a packet capture on there shows > the server is sending udp port 2055 unreachable ICMP messages back to > firewall 1. > > I use the GUI to configure so should I be using the Eth0 or Proxy setup > and what settings should I be tweaking? I can only see traffic destined for > the server or broadcast traffic on that subnet. > > > TIA > > Matt > > > > ---------- Forwarded message ---------- > From: Yuri Francalacci <[email protected]> > To: [email protected] > Cc: > Date: Fri, 29 May 2015 16:16:32 +0200 > Subject: Re: [Ntop-misc] nProbe configuration > Matt, > could you post the way you are starting either ntopng and nprobe? > Yuri > ############################################### > Yuri Francalacci - [email protected] - http://www.ntop.org > "Simplicity is the ultimate sophistication" - Leonardo da Vinci > ############################################### > > On 29 May 2015, at 15:49, Matt Thompson <[email protected]> wrote: > > I'm hoping somebody can help what is probably a simple issue. > > I have installed the trial licence successfully but am struggling to > configure ntop/nprobe to get useful data, despite following the > documentation and some related YouTube videos. > > I have a simple setup: > > (Firewall 1) > > <> > > (Firewall 2) > > <> > > (Ntop/nprobe installation server) > > > Firewall 1 is where I have Netflow exporting configured. The server has > all the relevant roles installed on the one box. Firewall 2 has all > relevant traffic allowed through it, but a packet capture on there shows > the server is sending udp port 2055 unreachable ICMP messages back to > firewall 1. > > I use the GUI to configure so should I be using the Eth0 or Proxy setup > and what settings should I be tweaking? I can only see traffic destined for > the server or broadcast traffic on that subnet. > > > TIA > > Matt > > _______________________________________________ > Ntop-misc mailing list > [email protected] > http://listgateway.unipi.it/mailman/listinfo/ntop-misc > > > > _______________________________________________ > Ntop-misc mailing list > [email protected] > http://listgateway.unipi.it/mailman/listinfo/ntop-misc >
_______________________________________________ Ntop-misc mailing list [email protected] http://listgateway.unipi.it/mailman/listinfo/ntop-misc
