I am so sorry about this duplicated email. I guess I have missed your reply in the old thread because my previous email box cannot receive any mail from this mail list. I have contacted with the system administrator but nothing happened. So I have to registered with my another email box and resend it. Sorry again.
I just searched in the mail archive and found your reply, thank you again. Alan -------------------------------------------------------------------------------- ------------------ 原始邮件 ------------------ 发件人: Alfredo Cardigliano <[email protected]> 发送时间: 2015-10-26 21:04:25 收件人: ntop-misc <[email protected]> 抄送: (无) 主题: Re: [Ntop-misc] why only one queue with 82576 with igb driver Hi Wang please no not post several time the same questions, you already have a reply for this on another thread. Thank you Alfredo On 26 Oct 2015, at 13:27, Wang <[email protected]> wrote: Dear all, I am running pf_ring 5.6.1 with a 4-port card based on intel 82576. 82576 has 8 rx queues an 8 tx queue, but in my box, I got this: [root@test232 examples]# dmesg |grep igb|grep Using igb 0000:02:00.0: Using MSI-X interrupts. 1 rx queue(s), 1 tx queue(s) igb 0000:02:00.1: Using MSI-X interrupts. 1 rx queue(s), 1 tx queue(s) and, [root@ezsonar232 igb]# ethtool -i eth1 driver: igb version: 4.1.2 firmware-version: 1.2, 0xdc120000 bus-info: 0000:02:00.1 supports-statistics: yes supports-test: yes supports-eeprom-access: yes supports-register-dump: yes supports-priv-flags: no so, it looks like there is only one queue working, so, how to enable the other queues? Many thanks! _______________________________________________ Ntop-misc mailing list [email protected] http://listgateway.unipi.it/mailman/listinfo/ntop-misc
_______________________________________________ Ntop-misc mailing list [email protected] http://listgateway.unipi.it/mailman/listinfo/ntop-misc
