Hi Fernando if you have to send a full copy of the aggregated traffic (fanout) to all the 4 egress interfaces you can use zreplicator, if you have to load-balance the aggregated traffic to the 4 egress interfaces, you need an extended version of zbalance_ipc (it should open physical interfaces instead of egress queues)
As of the hw to use, I can recommend any igb-based Intel card (e.g. i350). A 8-port or 2x 4-port should perform the same. Alfredo > On 26 Jan 2016, at 18:51, Fernando <[email protected]> wrote: > > Hi, > > I am seeking for advice on how to set up a device to aggregate and distribute > the traffic coming in two 1000BaseT traffic feeds across four 1000BaseT > outputs. > > These are the basic requirements: > > - Input: Two different traffic feeds 1000BaseT, connected to different ports > in an Intel network card (let's say, eth1, eth2) > - Output: Input (eth1, eth2) has to be aggregated on a single stream > (fan-out) and spread out across eth3, eth4, eth5 and eth6. > > I was thinking of using: > > ../PF_RING/userland/examples_zc/zbalance_ipc -i zc:eth1,zc:eth2 -c 1 -n 10 -m > 2 -a -d > > at the input to aggregate the 2 traffic feeds > > and distribute it at the output like this > > ../PF_RING/userland/examples_zc/zbounce -i zc:1@1 -o eth3,eth4,eth5,eth6 -c 1 > > I would appreciate any advice about the PF_RING applications to use, if those > above are not correct. > > Also, it would be great to have some hardware recommendations for this > application taking into account that I expect to get wire-speed packet > capture at the outputs. > > For instance, I don't know if I should expect better performance from one > single Intel 1000BaseT 8-port card compared to two Intel 1000BaseT 4-port > card, or if there is any server platform that performs well for this kind of > applications... > > Thanks! > Fernando > _______________________________________________ > Ntop-misc mailing list > [email protected] <mailto:[email protected]> > http://listgateway.unipi.it/mailman/listinfo/ntop-misc > <http://listgateway.unipi.it/mailman/listinfo/ntop-misc>
signature.asc
Description: Message signed with OpenPGP using GPGMail
_______________________________________________ Ntop-misc mailing list [email protected] http://listgateway.unipi.it/mailman/listinfo/ntop-misc
