That embarrassing, I didn't know that vmxnet3 was a 10gb interface
which explains why I was getting the license error. Thanks.
root@nbox:/etc/cento# ethtool -i ens192
driver: vmxnet3
version: 1.4.5.0-k-NAPI
firmware-version:
expansion-rom-version:
bus-info: 0000:0b:00.0
supports-statistics: yes
supports-test: no
supports-eeprom-access: no
supports-register-dump: yes
supports-priv-flags: no
root@nbox:/etc/cento# ethtool ens192
Settings for ens192:
Supported ports: [ TP ]
Supported link modes: 1000baseT/Full
10000baseT/Full
Supported pause frame use: No
Supports auto-negotiation: No
Advertised link modes: Not reported
Advertised pause frame use: No
Advertised auto-negotiation: No
Speed: 10000Mb/s
Duplex: Full
Port: Twisted Pair
PHYAD: 0
Transceiver: internal
Auto-negotiation: off
MDI-X: Unknown
Supports Wake-on: uag
Wake-on: d
Link detected: yes
On Fri, Aug 12, 2016 at 3:43 AM, Alfredo Cardigliano
<[email protected]> wrote:
> Please provide "ethtool -i ens192" and "ethtool ens192"
>
> Regards
> Alfredo
>
>> On 12 Aug 2016, at 05:23, GH <[email protected]> wrote:
>>
>> Everytime I start cento from nbox I get this error:
>>
>> Permanent nProbe cento S license found [/etc/cento.license]
>> 11/Aug/2016 23:13:08Built on Ubuntu 16.04.1 LTS
>> 11/Aug/2016 23:13:08Available CPU Cores: 4
>> 11/Aug/2016 23:13:08Max flow duration set to 120 sec
>> 11/Aug/2016 23:13:08Max flow idleness set to 30 sec
>> 11/Aug/2016 23:13:08Flow hash size set to 512000 buckets
>> 11/Aug/2016 23:13:08Hashes will have up to 2000000 buckets
>> 11/Aug/2016 23:13:08WARNING: No flow export defined (missing -5/-9
>> parameters)
>> 11/Aug/2016 23:13:08WARNING: Flows are just harvested after they are expired
>> 11/Aug/2016 23:13:08Reading packets from interface ens192... [coreId: 0]
>> 11/Aug/2016 23:13:08Created interface ens192
>> 11/Aug/2016 23:13:08WARNING: Your cento license (S) does not allow
>> (err=2 pid=15016) to open
>> 11/Aug/2016 23:13:08WARNING: the interfaces you have specified. Please
>> review the
>> 11/Aug/2016 23:13:08WARNING: command line parameters or upgrade the
>> cento license type
>> 11/Aug/2016 23:13:08WARNING: Running in demo mode (5 min)
>> 11/Aug/2016 23:13:08Initializing ens192...
>> 11/Aug/2016 23:13:08Started packet capture on ens192...
>> 11/Aug/2016 23:13:08cento changed user to 'nobody'
>> 11/Aug/2016 23:13:09Started flow exporter for ens192
>>
>> What am I doing wrong here?
>> _______________________________________________
>> Ntop-misc mailing list
>> [email protected]
>> http://listgateway.unipi.it/mailman/listinfo/ntop-misc
>
>
> _______________________________________________
> Ntop-misc mailing list
> [email protected]
> http://listgateway.unipi.it/mailman/listinfo/ntop-misc
_______________________________________________
Ntop-misc mailing list
[email protected]
http://listgateway.unipi.it/mailman/listinfo/ntop-misc
