Rai the command should be correct. I cannot comment on -i switch0 if it’s the right interface, but I would suggest to do -i ethX where ethX is the internet interface.
Please let us know if it works Regards Luca > On 02 Sep 2016, at 20:42, Rai Suraj <[email protected]> wrote: > > Hi, > > I have a 5 port POE Ubiquiti EdgeRouter. eth0 and eth1 are connected to > external ISPs and is configured in redundant setup with eth0 as primary. > eth2,3,4 are configured as a switch (router has hardware support for these 3 > ports) with interface switch0. > > I setup nprobe listening to either eth0 or switch0 but am not really seeing > the traffic I was expecting. For instance, I know I am browsing YouTube on > one of my internal machines connected via switch0 but ntopng hardly shows any > traffic going through. > > Any thoughts on what would be the best way to collect stats going through > this router on my network? I want to be in a position to monitor traffic > history across every device in my internal network. > > nprobe command: nprobe --zmq "tcp://*:5556 <tcp://*:5556>" -i switch0 -n none > ntopng command: ntopng -i "tcp://192.168.1.1:5556 <tcp://192.168.1.1:5556>" > > Would appreciate any help/suggestions. > > Thanks > > _______________________________________________ > Ntop-misc mailing list > [email protected] > http://listgateway.unipi.it/mailman/listinfo/ntop-misc
_______________________________________________ Ntop-misc mailing list [email protected] http://listgateway.unipi.it/mailman/listinfo/ntop-misc
