Hi Alfredo Looking at the flags:
eno1: flags=4355<UP,BROADCAST,PROMISC,MULTICAST> mtu 1500 ens3f3: flags=4355<UP,BROADCAST,PROMISC,MULTICAST> mtu 1500 I would say that the link is up. Any other idea? Regards, Marcel Von: [email protected] [mailto:[email protected]] Im Auftrag von Alfredo Cardigliano Gesendet: Donnerstag, 4. Mai 2017 14:29 An: [email protected] Betreff: Re: [Ntop-misc] disk2n: Replay probem Hi Marcel if I understand correctly link is down, if this is the case disk2n cannot send packets, until the link comes up. Please correct me if I misunderstood. Regards Alfredo On 4 May 2017, at 14:23, Lüthi Marcel FUB <[email protected]<mailto:[email protected]>> wrote: Hi, I'm trying to replay a pcap file on an interface which is not connected (just for test purposes). Actually there is 1 optical interface and 1 ethernet interface which I use. But the problem is the same... nothing gets really written to the interfaces (see below). I suspect that replaying to an "open" port is not possible. Or is there some other problem? Thanks in advance for any help! Regards, Marcel
_______________________________________________ Ntop-misc mailing list [email protected] http://listgateway.unipi.it/mailman/listinfo/ntop-misc
