Hi, We were configuring the RRD Plugin with a filter so that nTop writes RRD files only for the hosts on our network.
However, when we enter our full list of subnets, around 30 CIDRs, into the Plugins -> Round-Robin Database -> Configure -> Hosts Filter the webpage throws an error. However, when we use a smaller list of CIDRs, it works just fine. While this works, we still would like to minimized the RRD footprint, so we can plan for a certain disk size (ramdisk / SSDs, etc). The list we are using in the RRD Configure web interface, is the same that we use on the command line to run nTop: /usr/local/bin/ntop -d -L -u ntop -P /bak/ntop.rtr8n9 -w 3002 --interface none --skip-version-check --sticky-hosts --max-table-rows 300 --use-syslog daemon --trace-level 3 -x 1048576 -X 4194304 --instance ntopr8n9 --track-local-hosts --local-subnets real_ip_1.0/21,real_ip_2.0/22, 192.168.32.0/19,192.168.64.0/18,192.168.128.0/23,10.16.32.0/19,10.16.64.0/18,10.16.128.0/23,10.17.32.0/19,10.17.64.0/18,10.17.128.0/23,10.18.32.0/19,10.18.64.0/18,10.18.128.0/23,10.19.32.0/19,10.19.64.0/18,10.19.128.0/23,10.20.32.0/19,10.20.64.0/18,10.20.128.0/23,10.21.32.0/19,10.21.64.0/18,10.21.128.0/23,10.22.32.0/19,10.22.64.0/18,10.22.128.0/23,10.23.32.0/19,10.23.64.0/18,10.23.128.0/23,172.23.0.0/24 Is there a way to work around this problem? Regards HASSAN
_______________________________________________ Ntop mailing list [email protected] http://listgateway.unipi.it/mailman/listinfo/ntop
