In my “Active Flows” list, I have a client (10.10.20.220@220), with ~1.5GB
having been tracked, but clicking on the client link results in the error page:
Host 10.10.20.220_20 cannot be found.Perhaps this host has been previously
purged from memory or it has never been observed by this ntopng instance.
This is CentOS 6.5, /etc/ntopng/ntopng.conf looks like:
-G=/var/tmp/ntopng.pid
--dns-mode 1
-m
"10.10.20.0/24,10.10.10.0/24,10.10.11.0/24,10.10.20.0/24,10.10.22.0/24,10.10.30.0/24,192.168.0.0/16"
--interface eth0
--dump-hosts local
-F
Hosts in non-vlan’ed subnets (10.10.11.0/24, 192.168.0.0/16) have full
information pages when clicked on.
Is there something additional I need to configure?
Thanks,
Graham
_______________________________________________
Ntop mailing list
[email protected]
http://listgateway.unipi.it/mailman/listinfo/ntop
