Yuri,

I think you meant that for Bob, one email down.  I was just showing him what I 
was using that works fine.


Michael Pollock
Systems Engineer

[Description: Description: Description: Description: 
http://www.possiblenow.com/styleguide/images/pn_corporate_signature.gif]
4400 River Green Parkway, Suite 100
Duluth, GA 30096

Mobile: 678-520-0672
[email protected]<mailto:[email protected]>
www.possiblenow.com<http://www.possiblenow.com/>

From: [email protected] 
[mailto:[email protected]] On Behalf Of Yuri Francalacci
Sent: Friday, November 21, 2014 1:28 PM
To: [email protected]
Subject: Re: [Ntop] Active Flows : no results found

Michael,
could you post the version of nprobe you are using? I don’t see any major issue 
with the configuration you have sent.

Yuri
###############################################
Yuri Francalacci   -   [email protected]<mailto:[email protected]>   -   
http://www.ntop.org
"Simplicity is the ultimate sophistication" - Leonardo da Vinci
###############################################

On 21 Nov 2014, at 17:43, Michael Pollock 
<[email protected]<mailto:[email protected]>> wrote:

I’d troubleshoot each piece separately.  Is nprobe receiving and exporting the 
flows?  The “-b 2” should produce a lot of verbose logging from there.

Also, in ntopng, I see you have specified “-n none”.  Try changing that to 
receive the flows from nprobe.  I use “-n udp://127.0.0.1:2055” in my setup.


Michael Pollock
Systems Engineer

<image001.gif>
4400 River Green Parkway, Suite 100
Duluth, GA 30096

Mobile: 678-520-0672
[email protected]<mailto:[email protected]>
www.possiblenow.com<http://www.possiblenow.com/>

From: 
[email protected]<mailto:[email protected]> 
[mailto:[email protected]] On Behalf Of Bob Caddell
Sent: Thursday, November 20, 2014 5:31 PM
To: [email protected]<mailto:[email protected]>
Subject: [Ntop] Active Flows : no results found

Hi,
I have installed ntopng, nprobe and all the other requirements. I have 
configured my Cisco router to export netflow data to the nprobe in collector 
mode on port 2055.
I start the nProbe like this :  nprobe --zmq "tcp://*:5556" -i none -n none -b 
2 -3 2055
The ntopng with:  ntopng -i tcp://127.0.0.1:5556<http://127.0.0.1:5556/>
When I do a tcpdump on the nprobe/ntopng host I can see traffic from my Cisco 
router:
tcpdump port 2055
14:10:20.618537 IP 10.0.254.1.58944 > 198.189.xxx.3.iop: UDP, length 1464
14:10:20.618616 IP 10.0.254.1.58944 > 198.189.xxx.3.iop: UDP, length 1464
14:10:20.618664 IP 10.0.254.1.58944 > 198.189.xxx.3.iop: UDP, length 1464
14:10:20.618705 IP 10.0.254.1.58944 > 198.189.xxx.3.iop: UDP, length 1464
14:10:20.618750 IP 10.0.254.1.58944 > 198.189.xxx.3.iop: UDP, length 1464
14:10:20.618804 IP 10.0.254.1.58944 > 198.189.xxx.3.iop: UDP, length 1464
My problem is that nothing shows up on the web interface after I log in.
Does anyone see a problem?
Thank you,
Bob




--
Bob Caddell, Supervisor of Technology, Maintenance & Operations
Siskiyou County Office of Education
609 South Gold Street, Yreka CA 96097-3110
530.842.8420 - 530.842.8436 Fax
http://www.siskiyoucoe.net<http://www.siskiyoucoe.net/>

Providing Educational Leadership, Resources and Services to Districts and 
Schools to Ensure Learning For All Students
CONFIDENTIALITY NOTICE: This communication with its contents may contain 
confidential and/or legally privileged information. It is solely for the use of 
the intended recipient(s). Unauthorized interception, review, use or disclosure 
is prohibited and may violate applicable laws including the Electronic 
Communications Privacy Act. If you are not the intended recipient, please 
contact the sender and destroy all copies of the communication.


The information contained in this communication is confidential, is intended 
only for the use of the recipient named above, and may be legally privileged. 
If the reader of this message is not the intended recipient, you are hereby 
notified that any dissemination, distribution or copying of this communication 
is strictly prohibited. If you have received this communication in error, 
please resend this communication to the sender and delete the original message 
or any copy of it from your computer system
_______________________________________________
Ntop mailing list
[email protected]<mailto:[email protected]>
http://listgateway.unipi.it/mailman/listinfo/ntop


The information contained in this communication is confidential, is intended 
only for the use of the recipient named above, and may be legally privileged. 
If the reader of this message is not the intended recipient, you are hereby 
notified that any dissemination, distribution or copying of this communication 
is strictly prohibited. If you have received this communication in error, 
please resend this communication to the sender and delete the original message 
or any copy of it from your computer system
_______________________________________________
Ntop mailing list
[email protected]
http://listgateway.unipi.it/mailman/listinfo/ntop

Reply via email to