Hi Chris
yes ES is supported even though it is under development. Glad to see ti
works for you.

The template I am referring is the nprobe template I expect you to use:
ignore my question

Luca

On 12/02/2014 04:01 AM, Chris Bennett wrote:
> Hi Luca,
>
>> Can you please tell me how you started nprobe so I can see what
>> template was used?
> Hmm, I'm not using nprobe :)
>
> I'm sending them from ntopng using pcap.
>
> /usr/bin/ntopng \
>   -G=/var/tmp/ntopng.gid \
>   --interface 6 \
>   --local-networks "192.168.0.0/16,172.16.0.0/12,10.0.0.0/8" \
>   --dns-mode 1 \
>   --dump-flows 'es;flows;ntopng;http://el01.mydom.lan:9200/_bulk' \
>   --packet-filter 'ip and not (host 10.11.0.1 and port 161)' \
>   --ndpi-protocols /var/tmp/ntopng/protos.txt \
>   ;
>
> Hopefully that is supported?  It seems to work :)
>
> When you say template, is that the EL mapping for the index?  If so,
> here's that info for you:
>
>
> $ curl -XGET 
> 'http://el01.mydom.lan:9200/ntopng-2014.12.02/_mapping?pretty=true'
> {
>   "ntopng-2014.12.02" : {
>     "mappings" : {
>       "flows" : {
>         "properties" : {
>           "@timestamp" : {
>             "type" : "date",
>             "format" : "dateOptionalTime"
>           },
>           "@version" : {
>             "type" : "long"
>           },
>           "DST_VLAN" : {
>             "type" : "long"
>           },
>           "FIRST_SWITCHED" : {
>             "type" : "long"
>           },
>           "IN_BYTES" : {
>             "type" : "long"
>           },
>           "IN_PKTS" : {
>             "type" : "long"
>           },
>           "IPV4_DST_ADDR" : {
>             "type" : "string"
>           },
>           "IPV4_SRC_ADDR" : {
>             "type" : "string"
>           },
>           "L4_DST_PORT" : {
>             "type" : "long"
>           },
>           "L4_SRC_PORT" : {
>             "type" : "long"
>           },
>           "L7_PROTO" : {
>             "type" : "long"
>           },
>           "LAST_SWITCHED" : {
>             "type" : "long"
>           },
>           "OUT_BYTES" : {
>             "type" : "long"
>           },
>           "OUT_PKTS" : {
>             "type" : "long"
>           },
>           "PROTOCOL" : {
>             "type" : "long"
>           },
>           "SRC_VLAN" : {
>             "type" : "long"
>           },
>           "TCP_FLAGS" : {
>             "type" : "long"
>           },
>           "type" : {
>             "type" : "string"
>           }
>         }
>       }
>     }
>   }
> }
>
> I've contemplated cutting out the ntopng redis pop & submit to
> elasticsearch, and use logstash instead to pop off of the ntopng redis
> server and apply additional filtering.  Haven't had time to play with that 
> yet.
>
> Thanks,
>
> Chris
> _______________________________________________
> Ntop mailing list
> [email protected]
> http://listgateway.unipi.it/mailman/listinfo/ntop

_______________________________________________
Ntop mailing list
[email protected]
http://listgateway.unipi.it/mailman/listinfo/ntop

Reply via email to