Hello,
I restarted ntopng now errors not seen. But ipv6 web interface and ipv6
traffic yet to work.
*ifconfig eth0*
eth0 Link encap:Ethernet HWaddr 78:e3:b5:05:b3:b4
inet addr:1xx.1xx.1.100 Bcast:158.144.1.255 Mask:255.255.255.0
inet6 addr: 2xx6:f00:1:1::cf/64 Scope:Global
inet6 addr: fe80::7ae3:b5ff:fe05:b3b4/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:64758 errors:0 dropped:0 overruns:0 frame:0
TX packets:43734 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:9309337 (9.3 MB) TX bytes:9332403 (9.3 MB)
*ifconfig eth1*
eth1 Link encap:Ethernet HWaddr 78:e3:b5:05:b3:b6
inet addr:1x.1xx.9.61 Bcast:10.144.9.255 Mask:255.255.255.0
inet6 addr: fe80::7ae3:b5ff:fe05:b3b6/64 Scope:Link
inet6 addr: 2xx6:f00:1:79:1::15/64 Scope:Global
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:19221271 errors:1 dropped:0 overruns:0 frame:1
TX packets:120 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:15249988809 (15.2 GB) TX bytes:15601 (15.6 KB)
*netstat -an | grep "400"*
tcp 0 0 0.0.0.0:4000 0.0.0.0:* LISTEN
*ntopng -G /var/run/ntopng.pid -i eth1 -w 4000 -n 1 -d /var/tmp/ntopng -U
ntopng -F eth1*
19/Mar/2015 18:24:44 [Prefs.cpp:620] WARNING: Discarding -F eth1: value out
of range
19/Mar/2015 18:24:44 [Ntop.cpp:767] Setting local networks to
192.168.0.0/16,172.16.0.0/12,10.0.0.0/8,127.0.0.0/8,0.0.0.0/32,224.0.0.0/8,239.0.0.0/8,255.255.255.255/32,127.0.0.0/8
19/Mar/2015 18:24:44 [Redis.cpp:93] Successfully connected to Redis
127.0.0.1:6379@0
19/Mar/2015 18:24:44 [PacketDumperTuntap.cpp:76] Interface tap0 has MAC
DA:AA:8C:A3:D3:1F
19/Mar/2015 18:24:44 [PacketDumperTuntap.cpp:38] eth1: dumping packets on
tap interface tap0
19/Mar/2015 18:24:44 [PcapInterface.cpp:81] Reading packets from interface
eth1...
19/Mar/2015 18:24:44 [Ntop.cpp:1015] Registered interface view eth1 [id: 0]
19/Mar/2015 18:24:44 [Ntop.cpp:985] Registered interface eth1 [id: 0]
19/Mar/2015 18:24:44 [Utils.cpp:276] WARNING: Unable to locate user
anonymous
19/Mar/2015 18:24:44 [main.cpp:205] PID stored in file /var/run/ntopng.pid
19/Mar/2015 18:24:44 [HTTPserver.cpp:423] HTTPS Disabled: missing SSL
certificate /usr/local/share/ntopng/httpdocs/ssl/ntopng-cert.pem
19/Mar/2015 18:24:44 [HTTPserver.cpp:425] Please read
https://svn.ntop.org/svn/ntop/trunk/ntopng/README.SSL if you want to enable
SSL.
19/Mar/2015 18:24:44 [HTTPserver.cpp:470] Web server dirs
[/usr/local/share/ntopng/httpdocs][/usr/local/share/ntopng/scripts]
19/Mar/2015 18:24:44 [HTTPserver.cpp:473] HTTP server listening on port 4000
19/Mar/2015 18:24:44 [main.cpp:253] Working directory: /var/tmp/ntopng
19/Mar/2015 18:24:44 [main.cpp:255] Scripts/HTML pages directory:
/usr/local/share/ntopng
19/Mar/2015 18:24:44 [Ntop.cpp:256] Welcome to ntopng x86_64 v.1.99.150319
(r9136) - (C) 1998-15 ntop.org
19/Mar/2015 18:24:44 [PeriodicActivities.cpp:53] Started periodic
activities loop...
19/Mar/2015 18:24:44 [RuntimePrefs.cpp:32] Dumping alerts into syslog
19/Mar/2015 18:24:44 [NetworkInterface.cpp:1114] Started packet polling on
interface eth1 [id: 0]...
*ntopng -h*
Available interfaces (-i <interface index>):
1. eth0
2. tap0
3. nflog
4. nfqueue
5. eth1
6. eth2
7. eth3
8. any
9. lo
Regards,
Anilkumar
On Thu, Mar 19, 2015 at 6:17 PM, Luca Deri <[email protected]> wrote:
> Hi,
> please do
> 1. provide the whole command line you have used
> 2. type ntopng -h and report the list of interfaces you have
>
> thanks Luca
>
>
> On 03/19/2015 01:32 PM, Anilkumar Naik wrote:
>
> Dear Luca,
>
> After SVN code following errors noticed. Any help?
>
> 19/Mar/2015 17:51:22 [HTTPserver.cpp:473] HTTP server listening on port
> 3000
> 19/Mar/2015 17:51:22 [main.cpp:253] Working directory: /var/tmp/ntopng
> 19/Mar/2015 17:51:22 [main.cpp:255] Scripts/HTML pages directory:
> /usr/local/share/ntopng
> 19/Mar/2015 17:51:22 [Ntop.cpp:256] Welcome to ntopng x86_64 v.1.99.150319
> (r9136) - (C) 1998-15 ntop.org
> 19/Mar/2015 17:51:22 [PeriodicActivities.cpp:53] Started periodic
> activities loop...
> 19/Mar/2015 17:51:22 [RuntimePrefs.cpp:32] Dumping alerts into syslog
> 19/Mar/2015 17:51:22 [NetworkInterface.cpp:1114] Started packet polling on
> interface eth1 [id: 0]...
> 19/Mar/2015 17:51:22 [NetworkInterface.cpp:1114] Started packet polling on
> interface eth0 [id: 3]...
> 19/Mar/2015 17:51:22 [NetworkInterface.cpp:1114] Started packet polling on
> interface eth2 [id: 4]...
> 19/Mar/2015 17:51:22 [NetworkInterface.cpp:1114] Started packet polling on
> interface eth3 [id: 5]...
> 19/Mar/2015 17:51:22 [NetworkInterface.cpp:1114] Started packet polling on
> interface lo [id: 6]...
> 19/Mar/2015 17:51:23 [PcapInterface.cpp:128] ERROR: Unable to open file
> '[802-3-ethernet]': [802-3-ethernet]: No such file or directory
> 19/Mar/2015 17:51:23 [PcapInterface.cpp:128] ERROR: Unable to open file
> 'duplex=full': duplex=full: No such file or directory
> 19/Mar/2015 17:51:23 [PcapInterface.cpp:128] ERROR: Unable to open file
> 'mac-address=78:E3:B5:05:B3:B6': mac-address=78:E3:B5:05:B3:B6: No such
> file or directory
> 19/Mar/2015 17:51:23 [PcapInterface.cpp:128] ERROR: Unable to open file
> '[connection]': [connection]: No such file or directory
> 19/Mar/2015 17:51:23 [PcapInterface.cpp:128] ERROR: Unable to open file
> 'id=eth1': id=eth1: No such file or directory
> 19/Mar/2015 17:51:23 [PcapInterface.cpp:128] ERROR: Unable to open file
> 'uuid=f4b153a3-49ed-415e-afbe-b843428b8416':
> uuid=f4b153a3-49ed-415e-afbe-b843428b8416: No such file or directory
> 19/Mar/2015 17:51:23 [PcapInterface.cpp:128] ERROR: Unable to open file
> 'type=802-3-ethernet': type=802-3-ethernet: No such file or directory
> 19/Mar/2015 17:51:23 [PcapInterface.cpp:128] ERROR: Unable to open file
> 'timestamp=1426140343': timestamp=1426140343: No such file or directory
> 19/Mar/2015 17:51:23 [PcapInterface.cpp:128] ERROR: Unable to open file
> '[ipv6]': [ipv6]: No such file or directory
> 19/Mar/2015 17:51:23 [PcapInterface.cpp:128] ERROR: Unable to open file
> 'method=manual': method=manual: No such file or directory
>
> Regards,
> Anilkumar
>
>
> On Thu, Mar 19, 2015 at 3:49 AM, Luca Deri <[email protected]> wrote:
>
>> Hi Anilkumar
>> can you please repeat the test using the code in SVN?
>>
>> Luca
>>
>> > On 13 Mar 2015, at 07:17, Anilkumar Naik <[email protected]> wrote:
>> >
>> > Dear All,
>> >
>> > Need your help to configure following.
>> >
>> > 1. Listen ntopng web interface on ipv6 and ipv4 ( dual stack)
>> >
>> > 2. We have configured port mirror ( all traffic seen at router
>> interface is given to ntopng). But we are unable to see any ipv6 protocols
>> in traffic. However we already using ipv6 addresses for Internet. Can you
>> pl help how to change this in ntopng?
>> >
>> > NTOPNG conf file:
>> >
>> > -G=/var/run/ntopng.pid
>> > -i=eth1
>> > -w=4000
>> > -m=xxxx:f00:1::/48
>> > -n=1
>> > -d=/var/tmp/ntopng
>> > -U=ntopng
>> > -F=eth1
>> > -l
>> >
>> > Regards,
>> > Anilkumar
>> > _______________________________________________
>> > Ntop mailing list
>> > [email protected]
>> > http://listgateway.unipi.it/mailman/listinfo/ntop
>>
>> _______________________________________________
>> Ntop mailing list
>> [email protected]
>> http://listgateway.unipi.it/mailman/listinfo/ntop
>>
>
>
>
> _______________________________________________
> Ntop mailing
> [email protected]http://listgateway.unipi.it/mailman/listinfo/ntop
>
>
>
> _______________________________________________
> Ntop mailing list
> [email protected]
> http://listgateway.unipi.it/mailman/listinfo/ntop
>
_______________________________________________
Ntop mailing list
[email protected]
http://listgateway.unipi.it/mailman/listinfo/ntop
