Here’s some information on Raspberry Pi NIC throughput and alternative devices:
http://www.jeffgeerling.com/blogs/jeff-geerling/getting-gigabit-networking Everything shares the USB 2.0 bus which has a theoretical throughput of 480 mbit/sec. So even with a gig USB NIC you’re not going to get gig throughput. On Wed, Feb 24, 2016 at 10:29 PM, Luca Deri <[email protected]> wrote: > The problem is not the CPU but the network interface that cannot go too > fast. I think that the speed you are targeting is too high for the Pi > ethernet interface > > Luca > > On 25 Feb 2016, at 00:46, dan <[email protected]> wrote: > > > On Wed, Feb 24, 2016 at 3:57 PM, Simone Mainardi <[email protected]> > wrote: > >> yes, but a single thread is spawn for each interface. So you won't be >> able to exploit all the 4 cores for 1 mirrored interface. Same for the >> beaglebone. > > > ah, ok. Any idea what the 900Mhz Pi CPU can handle then? What might I > need to hit ~130Mbps, or 200Mbps? > _______________________________________________ > Ntop mailing list > [email protected] > http://listgateway.unipi.it/mailman/listinfo/ntop > > > > _______________________________________________ > Ntop mailing list > [email protected] > http://listgateway.unipi.it/mailman/listinfo/ntop >
_______________________________________________ Ntop mailing list [email protected] http://listgateway.unipi.it/mailman/listinfo/ntop
