Hi Charles-Antoine what OS are you running? This happens because we reload the driver (disabled by default on the management interface, in fact you had to create the forcestart) and the system doesn’t reassign the ip to the interface, however this seems to work (the ip get reassigned) on the OSs we usually use.
Alfredo > On 25 Jan 2017, at 16:16, Charles-Antoine Mathieu > <[email protected]> wrote: > > I have 2 nics, both ixgbe driver, eth0 is used for capture, eth1 for admin. > > When the machine starts or if I reload pf_ring "service pf_ring restart" eth1 > is left with no configuration. I have to manually "service networking > restart" to connect the server to the admin network again. > > I'm I missing something or is there a way to automate this ? > > # tree /etc/pf_ring/ > /etc/pf_ring/ > ├── forcestart > ├── hugepages.conf > ├── pf_ring.conf > ├── pf_ring.start > └── zc > └── ixgbe > ├── ixgbe.conf > └── ixgbe.start > > All config files are empty except : > > # cat /etc/pf_ring/zc/ixgbe/ixgbe.conf > RSS=16,1 > > # cat /etc/pf_ring/hugepages.conf > node=0 hugepagenumber=2048 > node=1 hugepagenumber=2048 > > # zcount -h > Using PFRING_ZC v.6.5.0.161207 > > _______________________________________________ > Ntop mailing list > [email protected] > http://listgateway.unipi.it/mailman/listinfo/ntop _______________________________________________ Ntop mailing list [email protected] http://listgateway.unipi.it/mailman/listinfo/ntop
