Charles perhaps a static build would help. I am not familiar with Stretch: what is it and where I can find it?
Regards Luca > On 29 Sep 2017, at 02:21, Charles Hooper <[email protected]> wrote: > > Luca, > Thanks for the response. I reinstalled from the beginning. > However, I had to use Stretch not Jessie because RPI has moved on from Jessie > as its default. > I got to the last step in the instructions on > http://packages.ntop.org/RaspberryPI/ <http://packages.ntop.org/RaspberryPI/> > (hoping the Jessie install would be ok) > but got the following which I think means I need a Stretch specific build. > Any chance you could do one? > Charles > root@raspberrypi:/home/pi# apt-get install ntopng nprobe > Reading package lists... Done > Building dependency tree > Reading state information... Done > Some packages could not be installed. This may mean that you have > requested an impossible situation or if you are using the unstable > distribution that some required packages have not yet been created > or been moved out of Incoming. > The following information may help to resolve the situation: > > The following packages have unmet dependencies: > nprobe : Depends: libzmq3 but it is not installable > Depends: libhiredis0.10 but it is not installable > Recommends: ntopng-data but it is not going to be installed > ntopng : Depends: librrd4 but it is not installable > Depends: libzmq3 but it is not installable > Depends: libssl1.0.0 but it is not installable > Depends: libhiredis0.10 but it is not installable > Depends: libmysqlclient18 but it is not installable > Recommends: ntopng-data but it is not going to be installed > E: Unable to correct problems, you have held broken packages. > <end> > ======= > Hi Charles > packages have been just rebuilt. You do not need nProbe. In order to start > ntopng you need to be root. > > Please see the ntopng user’s guide at > http://www.ntop.org/support/documentation/documentation/ > <http://www.ntop.org/support/documentation/documentation/> > <http://www.ntop.org/support/documentation/documentation/ > <http://www.ntop.org/support/documentation/documentation/>> > > Regards Luca > > > > On 28 Sep 2017, at 04:43, Charles Hooper <charles at futurescope.co.uk > > <http://listgateway.unipi.it/mailman/listinfo/ntop>> wrote: > > > > I am a newbie so please forgive me if I ask a dumb question. > > > > I'm trying to install topng on my RPi with Stretch to monitor my home > > network (Mikrotik router). > > > > The latest build you have is 2.5 for Jessie. > > > > The easiest thing would be to ask you to rebuild ntopng on stretch so I can > > just install it, but I thought I would have a go myself!! > > > > After many trials I think I've installed the latest version. however the > > ntopng web page is not available on port 3000. > > > > the log says > > ==== > > 28/Sep/2017 11:10:01 [Trace.cpp:116] Logging into /var/tmp/ntopng/ntopng.log > > 28/Sep/2017 11:10:01 [Ntop.cpp:1419] Setting local networks to 127.0.0.0/8 > > <http://127.0.0.0/8> <http://127.0.0.0/8 <http://127.0.0.0/8>> > > 28/Sep/2017 11:10:01 [Redis.cpp:111] Successfully connected to redis > > 127.0.0.1 <http://127.0.0.1/>:6379 at 0 > > <http://listgateway.unipi.it/mailman/listinfo/ntop> > > 28/Sep/2017 11:10:01 [Redis.cpp:111] Successfully connected to redis > > 127.0.0.1 <http://127.0.0.1/>:6379 at 0 > > <http://listgateway.unipi.it/mailman/listinfo/ntop> > > 28/Sep/2017 11:10:09 [Ntop.cpp:1357] Parent process is exiting (this is > > normal) > > 28/Sep/2017 11:10:10 [NetworkDiscovery.cpp:48] ERROR: Unable to create pcap > > socket [1/Operation not permitted] > > 28/Sep/2017 11:10:17 [main.cpp:221] ERROR: Unable to create interface eth0 > > 28/Sep/2017 11:10:23 [main.cpp:221] ERROR: Unable to create interface lo > > 28/Sep/2017 11:10:23 [main.cpp:280] ERROR: Startup error: missing > > super-user privileges ? > > ==== > > > > and when I try to install nprobe (because I think it is missing) I get > > > > ==== > > sudo apt-get install nprobe > > Reading package lists... Done > > Building dependency tree > > Reading state information... Done > > Some packages could not be installed. This may mean that you have > > requested an impossible situation or if you are using the unstable > > distribution that some required packages have not yet been created > > or been moved out of Incoming. > > The following information may help to resolve the situation: > > > > The following packages have unmet dependencies: > > nprobe : Depends: libzmq3 but it is not installable > > Depends: libhiredis0.10 but it is not installable > > E: Unable to correct problems, you have held broken packages. > > ==== > > > > Any ideas what I am doing wrong? > > > > Charles > > _______________________________________________ > > Ntop mailing list > > Ntop at listgateway.unipi.it > > <http://listgateway.unipi.it/mailman/listinfo/ntop> > > http://listgateway.unipi.it/mailman/listinfo/ntop > > <http://listgateway.unipi.it/mailman/listinfo/ntop>_______________________________________________ > Ntop mailing list > [email protected] > http://listgateway.unipi.it/mailman/listinfo/ntop
_______________________________________________ Ntop mailing list [email protected] http://listgateway.unipi.it/mailman/listinfo/ntop
