Hi 

The man-page "ntop-rules.8" is not installed by "make install", even though 
the file exist.
        
My simple workaround on a RH 7.1.
Just copy "ntop-rules.8" from the source tree, into /usr/local/man/man8/
I also issued a "chown root.root ntop-rules.8", just to be consistent with 
how the "ntop.8" man page is installed.

Minor spelling error, etc in "ntop-rules.8".
" action
        Valid  actions executed when the packet matches the rule,
        are: alarm (send out  an  alarm),  and  mark  (mark  this
        packet for tuture use)."
I believe that "tuture" should be "future"

Original:
"icmp  ping-flood  ICMP_ECHO  any/any pktcount > 30 unit 10
       action alarm rearm 90
        Send  an alarm if an host receives more than 30 ICMP echo
        packets within 10 seconds. If the rule is fired, then  it
        will  be  re-enabled  not  before 90 seconds (this avoids
        ntop to send too many alarms)"

Suggested
"icmp  ping-flood  ICMP_ECHO  any/any pktcount > 30 unit 10
       action alarm rearm 90
        Send  an alarm if an host receives more than 30 ICMP echo
        packets within 10 seconds. If the rule is activated, it will not be     
        re-activated before 90 seconds has passed. This "rearm" and alarm     
        pause will stop ntop from generating too many alarms. (eg. without        
        the "rearm" pause, a simple 2 minute flood-ping attack, would
        generate 12 alarms instead of just two.)


Regards
Peter H.S.
_______________________________________________
Ntop mailing list
[EMAIL PROTECTED]
http://listmanager.unipi.it/mailman/listinfo/ntop

Reply via email to