I think you have to check your switch configuration: it seems a switched network issue.
You could connect ntop to a monitor port on switch taking into consideration which is the uplink switch and that some layer 2 errors are not replicated on monitor port. Bye Maurizio Dal Re (CISSP) ----- Original Message ----- From: "cappa" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, July 02, 2002 8:36 AM Subject: [Ntop] general network monitoring > hey guys, > > i want to overview my all network but it seems to be impossible! > i just get traffic between server where ntop is running and host who is > connecting to its! > i started my ntop like: > > ntop -u root --http-server 3002 -i eth0 -m 192.168.1.0/24 -E -q -O > /usr/local/ntop/logs/ -a /usr/local/ntop/logs/access_log -r 300 -t 5 -D > nira.at -K -c --throughput-bar-chart -S 1 -M -P /usr/local/ntop/logs/ > > is there possibility to overview whole network? > > thx > cappa > > _______________________________________________ > Ntop mailing list > [EMAIL PROTECTED] > http://lists.ntop.org/mailman/listinfo/ntop > > > _______________________________________________ Ntop mailing list [EMAIL PROTECTED] http://lists.ntop.org/mailman/listinfo/ntop
