That's the packet capture log, which is enabled with the -l or --pcap-log parameters. It's NOT the same as the ntop log.
 
On a interface with a lot of activity the packet capture log will indeed fill up quickly, and the Linux OS can only handle files up to 2gig in size.
 
I'd recommend not using the parameter. It's more useful for specific event logging rather than general usage... (i.e. logging abnormal traffic for later analysis with ethereal or the like)


From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of teasy
Sent: Friday, November 05, 2004 9:12 AM
To: [EMAIL PROTECTED]
Subject: Re: [Ntop] NTOP on big gateways

Hi all,
 
I found NTOP creating a file called 60.[device].pcap containing some traffic captured. As soon as this file reches the 2 GB limit of the filesystem NTOP terminates.
 
Is there a way to disable this file (if it is required, split to mutliple files) or whatever else... ?
 
Why is this file required and when does it get deleted/shrinked/... ?
 
Thanks a lot for your help!
 
Regards,
Marcus

teasy <[EMAIL PROTECTED]> wrote:
Hi NTOP List,
 
I've successfull installed NTOP and anything is running fine if the network bandwidth is at a low level (< 2-3 MBit/s). Starting from 2-3 MBit/s NTOP dies after aprox. 30 Minutes without any error message in the logs.
 
I don't know if this is related to the bandwidth monitored but it looks like this to me. I tried to disable things so my current config looks like:
 
--no-mac
--no-promiscuous
--disable-decoders
--track-local-hosts
-m (two local networks)
--B (filter for two networks)
--no-interface-merge
--trace-level 4
 
and listening on one interface. If I enable
 
--disable-sessions
 
it runs for some hours at low bandwidth (up to 5 MBit/s) an crashes then, even without a error in the logs.
 
I am running NTOP 3.0 on GNU/Linux GLIBC 2.3, LibPCAP 0.8.3, basicaly a Fedora Core 2 installation. There is 1 gb of mem available for ntop and ntop never used more than 180 mb.
 
The session information is not required by me (also it would be nice to have) but it should be able to handle a bandwidth of 32 - 56 mbit/s.
 
Anyone some idea where I can look at (increase debug output, some usefull configuration flags, other troubleshooting ideas...)...
 
Thx a lot...!
 
Kind regards,
Marcus
 


Gesendet von Yahoo! Mail - Jetzt mit 100MB kostenlosem Speicher_______________________________________________
Ntop mailing list
[EMAIL PROTECTED]
http://listgateway.unipi.it/mailman/listinfo/ntop


Gesendet von Yahoo! Mail - Jetzt mit 100MB kostenlosem Speicher
_______________________________________________
Ntop mailing list
[EMAIL PROTECTED]
http://listgateway.unipi.it/mailman/listinfo/ntop

Reply via email to