I ***think*** I understand what the protocol list is doing (and have implemented it already on a system). It works perfectly well for which application protocols (related to port numbers) to display.
However: I would like to have a similar way to monitor specific layer 3 protocols, not only port numbers (which are basically Layer 4 protocols); I am talking about protocol numbers like: 1 ICMP 2 IGMP 6 TCP 17 UDP 50 ESP 89 OSPF 103 PIM 113 PGM In our network only these protocol numbers are existent; filtering others out is of no use, as they are non-existent. And, the format of the output screen is not influenced. Output from All Protocols|Traffic is showing the data distribution over the various L3 protocols(TCP, UDP, ICMP, ICMPv6, DLC, IPX, Decnet, (R)ARP, AppleTalk, NetBios, OSI, IPv6, STP, IPSEC, OSPF, IGMP, Other. For us it would be nice if I could define the set of L3-protocols to display... As I understand it now, this feature is not implemented in the current version of ntop (v3.1). The suggestion from Arnt to sponsor this addition to ntop is interesting... We have some programming resources ourselves, but these are limited. If someone else is interested in doing this work, sponsored by the Dutch Army is appealing... However, getting approval for this construction within our organization will take some time: this is government, you know... Cees. -----Original Message----- From: Burton Strauss [mailto:[EMAIL PROTECTED] Sent: Tuesday, April 19, 2005 9:29 PM To: [email protected] Subject: RE: [Ntop] Ntop All Protocols|Traffic formatting? I think you mis-understand the protocol list - it identifies which tcp/ip protocols (port numbers) ntop monitors. That set is then used for ALL reports, with unlisted ports falling into "Other". If given, the parameter replaces the default list (see docs/FAQ for that). If you need to filter (in or out) specific protocols, etc. across ntop, look at the man page for the -B "filter" switch. This BPF expression controls the packets ntop sees. While people usually think of filters as "host this.someone.nl" or "net 192.168.0.0/16", you can in fact specify the protocols, e.g. "IP". The man page for tcpdump gives some examples. -----Burton -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of C2SC/Proj/Munster Sent: Tuesday, April 19, 2005 9:36 AM To: '[email protected]' Subject: [Ntop] Ntop All Protocols|Traffic formatting? Hello, For the Dutch Army we are investigating the usage of ntop as a NetFlow collector and reporting tool. This will possibly be implemented in the TITAAN network, which is used for army and airforce missions abroad. With the '-p' switch on ntop we can format the output of IP|Summary|Traffic by specifying a protocol list. My question: is there also a possibility to format the All Protocols|Traffic output by specifying a list of protocols (e.g. only TCP, UDP, ICMP, OSPF, PIM, ESP, and IGMP)? If so, is there a (hidden) switch to use? Thanks for replies and suggestions! Cees. Cees van Munster Royal Netherlands Army Project TITAAN Network Architect _______________________________________________ Ntop mailing list [email protected] http://listgateway.unipi.it/mailman/listinfo/ntop _______________________________________________ Ntop mailing list [email protected] http://listgateway.unipi.it/mailman/listinfo/ntop _______________________________________________ Ntop mailing list [email protected] http://listgateway.unipi.it/mailman/listinfo/ntop
