Any idea why it would run fine with the t and K switches and die
without?  I haven't tested this extensively in a completely controlled
environment, but it appears to be the case.  I'm wondering if gdb will
have similar results - work fine under gdb and die without.  Guess I'll
try and go from there.

Thanks for the reply!


>>> [EMAIL PROTECTED] 7/15/2006 9:16 AM >>>
Signal 11 is a seg fault. W/o information there's nothing to diagnose.

Run under gdb and capture the true failure point information,
instructions
are in docs/FAQ at the bottom.  Unfortunately that's the only way I
know to
do it.  And, of course, some weirder memory issues go away under gdb!

-----Burton

(Please note that I am speaking only as an individual and not as a
representative of my employer) 

-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of
Gary
Gatten
Sent: Tuesday, July 11, 2006 5:24 PM
To: [email protected] 
Subject: [Ntop] ntop 3.2.1 process dying after some period of time -
signal11 - FreeBSD 6.0

The only "interesting" record in messages is:
kernel: pid 46197 (ntop), uid 65534: exited on signal 11

This was a CVS install.  When I run with the -t and -K options, it
doesn't
seem to die.  Without the -t 5 and -K switches it's maybe 2 - 3 weeks. 
With
these switches it's ran for > 4 months.

Here's my current config:
-o -d -L --skip-version-check -x 16384 -X 65536 -m
10.0.0.0/8,192.168.0.0/16

Netflow plugin is active, NOT actually capturing packets - although I
think
libpcap is active as NIC is in promiscuous mode.

Any ideas?

Gary


===========================================================================





"This email is intended to be reviewed by only the intended recipient 
and
may contain information that is privileged and/or confidential.
 If you are not the intended recipient, you are hereby notified that 
any
review, use, dissemination, disclosure or copying of this email  and
its
attachments, if any, is strictly prohibited.  If you have  received
this
email in error, please immediately notify the sender by  return email
and
delete this email from your system."

_______________________________________________
Ntop mailing list
[email protected] 
http://listgateway.unipi.it/mailman/listinfo/ntop 

_______________________________________________
Ntop mailing list
[email protected] 
http://listgateway.unipi.it/mailman/listinfo/ntop

===========================================================================





"This email is intended to be reviewed by only the intended recipient
 and may contain information that is privileged and/or confidential.
 If you are not the intended recipient, you are hereby notified that
 any review, use, dissemination, disclosure or copying of this email
 and its attachments, if any, is strictly prohibited.  If you have
 received this email in error, please immediately notify the sender by
 return email and delete this email from your system."

_______________________________________________
Ntop mailing list
[email protected]
http://listgateway.unipi.it/mailman/listinfo/ntop

Reply via email to