Not sure exactly what you mean by "monitor".  If util / pps only - then
embedded RMON and/or SNMP is the way to go.  If you want more detail,
check out netflow.  I'm not sure if the 2500 series supports netflow -
depends on the IOS type I think.  Pretty sure the 4000 series supports
it, but again - not sure in your IOS.

Could also use SPAN ports.  Maybe setup 3 SPAN sessions with 2 - 3
ports each?  You'll have to test the load though and see if the CPU
keeps up, else maybe SPAN the uplinks on the 2500's - but could get
interesting on the NIC's you'll need.

Bottom line, if you don't need conversation details on all these links
- stick with RMON and SNMP.  If you need the details, netflow is "best"
if it's an option.  Else I'm thinking it would be fairly complex and
pricey.  Also consider a "probe" that sees all traffic through taps or
SPAN ports and then emits netflow streams.  I think this group makes
sucha  beastie - but it's been awhile.

Cisco IOS has a LOT of features in it - browse around and see if you
find anything.  Maybe IP accounting will work for you?  Just depends on
what you "need" vs. what you want.  Define your minimum goals and go
from there.

Gary


>>> [EMAIL PROTECTED] 8/30/2006 6:16 AM >>>
Hi everybody,

I need to monitor 7 * 1GBps full duplex network links beetwen a Cisco
4000 core switch and 7 Cisco 2500 switches. I'm thinkin about using
ntop
but I don't what could be the required hardware/configuration because
it
depends on:

- Using netwok taps requires to use 2 NICS per link to capture the
fill
duplex info. Is ntop able to merge the interfaces information? If not
I
could use an aggregation tap.

- Using ntop directly implies to capture packets at Gigabit speeds.
Any
experience using SAMPLING.

- The third option is to use Taps + sFlow probes (nProbes?) + ntop
(but
perhaps the costumer will not find affordable the solution).

The aggregated traffic is about 3Gbps.

Conclusion:

I would be glad to know about ntop implementation on high speed
networks
(performance(%cpu,%mem, packet lose, ...) / hardware).

Thank you in advance

-- 
David MorĂ³n Ruano


_______________________________________________
Ntop mailing list
[email protected] 
http://listgateway.unipi.it/mailman/listinfo/ntop

===========================================================================





"This email is intended to be reviewed by only the intended recipient
 and may contain information that is privileged and/or confidential.
 If you are not the intended recipient, you are hereby notified that
 any review, use, dissemination, disclosure or copying of this email
 and its attachments, if any, is strictly prohibited.  If you have
 received this email in error, please immediately notify the sender by
 return email and delete this email from your system."

_______________________________________________
Ntop mailing list
[email protected]
http://listgateway.unipi.it/mailman/listinfo/ntop

Reply via email to