Check your buffer size and util. No buffer space and it must drop them. >>> [EMAIL PROTECTED] 9/28/2006 3:18 PM >>> I'm using cacti for graphing traffic and such - but that doesn't give me a look into the upper layer traffic (what is doing what).
About to open a TAC case as it is, trying to figure out why we're seeing so many "Discards In" and no other counter really increasing (with the exception of the occasional Discards Out blip).... Will check out NBAR. On 9/28/06, Gary Gatten <[EMAIL PROTECTED]> wrote: > If there's no netflow, you can SPAN interfaces / MAC's going to > "services": routers, servers, uplinks, etc. Depending on your data > rates this may not be practical. Simple utilization (throughput, pps, > etc.) can be done with SNMP and/or RMON built into the switch. Also > check into NBAR - very handy if your IOS supports it. > > Gary > _______________________________________________ Ntop mailing list [email protected] http://listgateway.unipi.it/mailman/listinfo/ntop =========================================================================== "This email is intended to be reviewed by only the intended recipient and may contain information that is privileged and/or confidential. If you are not the intended recipient, you are hereby notified that any review, use, dissemination, disclosure or copying of this email and its attachments, if any, is strictly prohibited. If you have received this email in error, please immediately notify the sender by return email and delete this email from your system." _______________________________________________ Ntop mailing list [email protected] http://listgateway.unipi.it/mailman/listinfo/ntop
