found drivers for the p410i on the HP site, copied it to a usb drive- and when i try to "manually add driver" it doesnt find them on my usb drive- not sure what to try next- not even sure which of the drivers I actually need
and its a p410i smart array controller if that helps Jean-Paul Natola From: jnat...@hotmail.com To: ntsysadm@lists.myitforum.com Subject: RE: [NTSysADM] OMSALIVE equivalent for HP Date: Tue, 12 Nov 2013 19:46:43 -0500 so im sitting here and after it did not find any windows , i told it to auto probe- and I cant tell if it is actually doing anything or if it crashes, last line on screen is End of trace fc900d00f6104ce8 Segementation fault [pata_radisys] and the cursor is blinking and its a p410 controller according to the bios Jean-Paul Natola From: jnat...@hotmail.com To: ntsysadm@lists.myitforum.com Subject: RE: [NTSysADM] OMSALIVE equivalent for HP Date: Tue, 12 Nov 2013 14:50:19 -0500 I will report back tonight with my findings Jean-Paul Natola Subject: RE: [NTSysADM] OMSALIVE equivalent for HP Date: Tue, 12 Nov 2013 14:48:51 -0500 From: scaes...@caesare.com To: ntsysadm@lists.myitforum.com I’ve had it happen a number of times. Especially with newer hardware. -sc From: listsad...@lists.myitforum.com [mailto:listsad...@lists.myitforum.com] On Behalf Of Daniel Chenault Sent: Tuesday, November 12, 2013 2:47 PM To: ntsysadm@lists.myitforum.com Subject: Re: [NTSysADM] OMSALIVE equivalent for HP I’ve never had a problem in the 10+ years I’ve been using it on a wide variety of controllers. Only one time did I have to abort and find the right driver off their page first. From: Steven M. Caesare Sent: Tuesday, November 12, 2013 1:41 PMTo: ntsysadm@lists.myitforum.com Subject: RE: [NTSysADM] OMSALIVE equivalent for HP Perhaps not “just fine”. Provided the disk has included the linux drivers for said hardware already on it, it will work. If not then no, the disk will not recognize the RAID volume, and then you’ll have to decide if you want to attempt to locate and add the drivers. The FAQ for the utility addresses this. -sc From: listsad...@lists.myitforum.com [mailto:listsad...@lists.myitforum.com] On Behalf Of Daniel Chenault Sent: Tuesday, November 12, 2013 2:35 PM To: ntsysadm@lists.myitforum.com Subject: Re: [NTSysADM] OMSALIVE equivalent for HP pogostck is just the site name. The tool is the well-used one by Peter Nordahl. If the RAID is hardware-based it’ll recognize it just fine.From: J- P Sent: Tuesday, November 12, 2013 1:19 PMTo: ntsysadm@lists.myitforum.com Subject: RE: [NTSysADM] OMSALIVE equivalent for HP Will pogo stick recognize the raid? Jean-Paul Natola From: dani...@hotmail.com To: ntsysadm@lists.myitforum.com Subject: Re: [NTSysADM] OMSALIVE equivalent for HP Date: Tue, 12 Nov 2013 13:17:03 -0600If that doesn’t work (though it should) use http://www.pogostick.net/~pnh/ntpasswd/. That’s been my go-to tool for this for years and still works on 2008r2 (did it just last week). From: Kennedy, Jim Sent: Tuesday, November 12, 2013 1:10 PMTo: ntsysadm@lists.myitforum.com Subject: RE: [NTSysADM] OMSALIVE equivalent for HP Reset Windows server 2008r2 Password with Installation CD1. Insert the installation disk to your locked computer, restart. When following interface appears. Cllick“Repair your computer”. 2. A dialog with several options pops up, click Command Prompt. 3. When a Command Prompt black screen appears, type "copy c:\windows\system32\sethc.exe" and press Enter. Then type "copy c:\windows\system32\cmd.exe c:\windows\system32\sethc.exe" afterwards press Enter key. 4. Restart your computer. On the login screen, tap Shift key five times and you'll see a command prompt screen in administrator mode. OK, type "net user UserName NewPassword" (replace the UserName and UserPassword with which you wanna) and press Enter key. The user password will be replaced with new one. Close the window and then you can login that user with new password. From: listsad...@lists.myitforum.com [mailto:listsad...@lists.myitforum.com] On Behalf Of J- P Sent: Tuesday, November 12, 2013 2:04 PM To: ntsysadm@lists.myitforum.com Subject: RE: [NTSysADM] OMSALIVE equivalent for HP 2008r2 - tried blank password in safe no-go Jean-Paul Natola From: kennedy...@elyriaschools.org To: ntsysadm@lists.myitforum.com Subject: RE: [NTSysADM] OMSALIVE equivalent for HP Date: Tue, 12 Nov 2013 18:37:05 +0000What OS on the server? Boot it into safe mode, log in as administrator with a blank password. From: listsad...@lists.myitforum.com [mailto:listsad...@lists.myitforum.com] On Behalf Of J- P Sent: Tuesday, November 12, 2013 1:35 PM To: ntsysadm@lists.myitforum.com Subject: [NTSysADM] OMSALIVE equivalent for HP Hi all, I was wondering if HP had equivalent to Dell's LiveOS cd , i have never used an HP before so I really dont know what tool/utilities are available- Long story short, I need to get data from a server that no-one knows the password to, i have tried ophcrack but evidently SLAX doesn't have the HP drivers to recognize the array Jean-Paul Natola
