Well, I just exported mine, and it looked good. I didn't lose anything.
Win2K mag raved over it. Recommending everyone use it for backing up
DHCP info
-----Original Message-----
From: Diane Beckham [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, August 21, 2001 12:46 PM
To: NT System Admin Issues
Subject: RE: How to move DHCP from one server to another - hardware
upgrad e - not OS upgrade
Martin, check out my previous post on this (Monday)[1]. I asked if
anyone had used this yet.
I don't want to be the first kid on the block to try this. I always let
my twin brother try the new stuff first. If he didn't get in trouble
then I would try it.
Diane
[1] Obviously you must have my posts on auto-delete :-)
> -----Original Message-----
> From: Martin Blackstone
[mailto:[EMAIL PROTECTED]]
> Sent: Tuesday, August 21, 2001 12:38 PM
> To: NT System Admin Issues
> Subject: RE: How to move DHCP from one server to another -
hardware
> upgrad e - not OS upgrade
>
> Check this out....Fresh from Win2K magazine.
> An MS Util called DHCPExim
> You can BU and Restore DHCP settings to other servers.
>
> <ftp://ftp.mddinc.com/microsoft>
>
>
> -----Original Message-----
> From: Erik Sojka [mailto:[EMAIL PROTECTED]]
> Sent: Tuesday, August 21, 2001 7:52 AM
> To: NT System Admin Issues
> Subject: RE: How to move DHCP from one server to another - hardware
upgrad
> e - not OS upgrade
>
>
> Try REG ADD
>
> -----Original Message-----
> From: RE Young [mailto:[EMAIL PROTECTED]]
> Sent: Tuesday, August 21, 2001 10:44 AM
> To: NT System Admin Issues
> Subject: Re: How to move DHCP from one server to another - hardware
upgrad
> e - not OS upgrade
>
>
> Right I know the manual method works, I need to do the same thing in a
> batch file...I have tried "reg restore" and "regedit /S" neither
> imported the file.
>
> ----- Original Message -----
> From: Neilson, Andrew <mailto:[EMAIL PROTECTED]>
> To: NT System Admin Issues
<mailto:[EMAIL PROTECTED]>
> Sent: Tuesday, August 21, 2001 8:28 AM
> Subject: RE: How to move DHCP from one server to another - hardware
upgrad
> e - not OS upgrade
>
> use regedt32.
>
> Navigate to HKLM\System\CurrentControlSet\Services\DHCPServer and
> highlight configuration key.
>
> Click on File, Import and select the dhcpcfg file
>
> I have done this lots of times and the only thing to be aware of is
> that the original and new machine are the same SP.
>
> -----Original Message-----
> From: Robert E Young [ <mailto:[EMAIL PROTECTED]>]
> Sent: 21 August 2001 14:41
> To: NT System Admin Issues
> Subject: RE: How to move DHCP from one server to another - hardware
> upgrad e - not OS upgrade
>
>
> What I still want to know is : how to import that registry file from
> the command line........
>
> "reg.exe" doesn't work with the DHCP registry file
>
> and neither does
>
> regedit /s
>
> Robert
>
> -----Original Message-----
> From: Diane Beckham [mailto:[EMAIL PROTECTED]]
> Sent: Monday, August 20, 2001 5:10 PM
> To: NT System Admin Issues
> Subject: RE: How to move DHCP from one server to another - hardware
> upgrad e - not OS upgrade
>
>
> In the article at Technet it describes a new utility called
> DHCPExIm.exe on the Win2K ResourceKit Supp. 1 Has anyone used this
> utility yet? I need to move my DHCP also, and was wondering if this
> works....
>
> Diane
>
> -----Original Message-----
> From: Rene de Haas [mailto:[EMAIL PROTECTED]]
> Sent: Monday, August 20, 2001 7:10 AM
> To: NT System Admin Issues
> Subject: RE: How to move DHCP from one server to another - hardware
> upgrad e - not OS upgrade
>
>
> I think I used these instructions when I did it.
>
> <http://www.jsiinc.com/subd/tip1600/rh1628.htm>
>
> I have done it once and it worked, but like Kevin says, YMMV.
>
> Regards
> Rene
>
> -----Original Message-----
> From: Flanagan, Kevin [mailto:[EMAIL PROTECTED]]
> Sent: Monday, August 20, 2001 2:12 PM
> To: NT System Admin Issues
> Subject: RE: How to move DHCP from one server to another - hardware
> upgrad e - not OS upgrade
>
>
> There is a technet article.
>
> <http://support.microsoft.com/support/kb/articles/Q130/6/42.asp>
>
>
> Your Mileage May Vary, these are updated instructions since I tried to
> do this about a year ago, it didn't work for a crap back then.
>
>
>
> Good luck,
>
>
> Kevin
>
>
>
>
> +-------------------------------------------------------------------+
> Kevin Flanagan
> C/S Planning Engineer III
> I/T Implementation Department
> Branch Banking & Trust Company
> 3261 Atlantic Avenue, Suite 116
> MC: 172-85-01-00
> Raleigh, NC 27604
> Voice: 919-716-6209
>
> -----Original Message-----
> From: Robert E Young [mailto:[EMAIL PROTECTED]]
> Sent: Saturday, August 18, 2001 2:04 PM
> To: NT System Admin Issues
> Subject: How to move DHCP from one server to another - hardware
upgrade -
> not OS upgrade
>
>
> Has anyone moved/copied DHCP from one server to another ? This is a
> total PC replacement (hardware upgrade only - not OS)
>
> or
>
>
> Does anyone KNOW of a command line way to import the backup registry
> file. e \winnt\system32\DHCP\backup\DHCPcfg , (it is a binary file) ?
>
> thx,
> rey
>
>
> -----Original Message-----
> From: Robert E Young [mailto:[EMAIL PROTECTED]]
> Sent: Thursday, August 16, 2001 8:36 PM
> To: NT System Admin Issues
> Subject: RE: command line import of the DHCPcfg file
>
>
> Unfortunately, it is a binary file, not an ascii test file..... rey
>
> -----Original Message-----
> From: Kevin Miller [mailto:[EMAIL PROTECTED]]
> Sent: Thursday, August 16, 2001 11:07 PM
> To: NT System Admin Issues
> Subject: RE: command line import of the DHCPcfg file
>
>
> open it with notepad.
>
>
> Kevinm QWSZC, VRY+Y, NFH, SAD-VF, DERSDESDFG
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> More letters after my names makes me Smarter.
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> please respond back to rent this ad space for your needs
>
> -----Original Message-----
> From: Robert E Young [mailto:[EMAIL PROTECTED]]
> Sent: Thursday, August 16, 2001 6:19 PM
> To: NT System Admin Issues
> Subject: command line import of the DHCPcfg file
> Importance: High
>
>
> DHCP server creates its own registry backup i.e
> \winnt\system32\DHCP\backup\DHCPcfg the file has no extension. It can
> be imported to the registry using the regedt32 utility, however, I
> need to import it in a batch file.
>
> I have tried regedit /s
>
> I have tried reg from the resource kit
>
> neither work.......................
>
> Does anyone KNOW of a command line way to import that particular
> registry file.
>
> TIA
>
> Robert E Young MCSE
> Dallas, TX
>
> http://www.sunbelt-software.com/ntsysadmin_list_charter.htm
>
>
> http://www.sunbelt-software.com/ntsysadmin_list_charter.htm
>
>
> http://www.sunbelt-software.com/ntsysadmin_list_charter.htm
>
>
> http://www.sunbelt-software.com/ntsysadmin_list_charter.htm
>
>
> http://www.sunbelt-software.com/ntsysadmin_list_charter.htm
>
>
> http://www.sunbelt-software.com/ntsysadmin_list_charter.htm
>
>
>
> ***
>
> The information in this e-mail is confidential and intended solely for
> the individual or entity to whom it is addressed. If you have received
> this e-mail in error please notify the sender by return e-mail, delete
> this e-mail, and refrain from any disclosure or action based on the
> information.
>
> ****
>
> http://www.sunbelt-software.com/ntsysadmin_list_charter.htm
>
>
> http://www.sunbelt-software.com/ntsysadmin_list_charter.htm
>
>
> http://www.sunbelt-software.com/ntsysadmin_list_charter.htm
>
>
> http://www.sunbelt-software.com/ntsysadmin_list_charter.htm
>
>
> http://www.sunbelt-software.com/ntsysadmin_list_charter.htm
>
>
> http://www.sunbelt-software.com/ntsysadmin_list_charter.htm
>
http://www.sunbelt-software.com/ntsysadmin_list_charter.htm
http://www.sunbelt-software.com/ntsysadmin_list_charter.htm