RE: W2K Pro Install

[Network Issues]

Title: Message

Thanks Javier...it was the memory.  Apparently there was a mix of 66mhz and 100mhz SDRAM in the system and somehow W2K didn't like it!   Thanks to all for responding.   Ron   -----Original Message----- From: Greg Page [mailto:[EMAIL PROTECTED]] Sent: Thursday, September 27, 2001 5:13 PM To: NT System Admin Issues Subject: RE: W2K Pro Install   Adaptec 2940UW drivers are native to W2K.     Greg -----Original Message----- From: Steve Woods [mailto:[EMAIL PROTECTED]] Sent: Thursday, September 27, 2001 3:51 PM To: NT System Admin Issues Subject: RE: W2K Pro Install Have you tried install the MFG. drivers for the SCSI card using F6 during the install? -----Original Message----- From: Network Issues [mailto:[EMAIL PROTECTED]] Sent: Thursday, September 27, 2001 12:18 PM To: NT System Admin Issues Subject: W2K Pro Install Goodmorning All,   I've been working on installing W2K Pro on a test box and I continually receive an error during the setup process.   I am able to get to the portion of the CD install where it begins copying files to the hard drive.  However, each time at about 17% or 18% of the process I receive an error that a particular file cannot be copied to the hard drive.  I can hit retry and the same message reappears.  The message further states that there is something wrong with the CD and if the error persists to call MS Support.   The test system is a P3/600 with 2 SCSI drives running off of an Adaptec 2940UW controller.  I have swapped all of the parts out:  SCSI cables, IDE cable for the CD, the actual CD and I've also used 3 different copies of W2K Professional on CD.   I really don't want to call MS.  Anyone have any suggestions?   TIA   Ron Want to unsub? Do that here: http://www.w2knews.com/rd/rd.cfm?id=unsub Need a good FAQ? Try this one first: http://www.ultratech-llc.com/KB/ Want to unsub? Do that here: http://www.w2knews.com/rd/rd.cfm?id=unsub Need a good FAQ? Try this one first: http://www.ultratech-llc.com/KB/ Want to unsub? Do that here: http://www.w2knews.com/rd/rd.cfm?id=unsub Need a good FAQ? Try this one first: http://www.ultratech-llc.com/KB/ Want to unsub? Do that here: http://www.w2knews.com/rd/rd.cfm?id=unsub Need a good FAQ? Try this one first: http://www.ultratech-llc.com/KB/