Oh, yeah, one other thing: Does the stacking consume a standard network port, or is there a special stacking jack on the switch?
On Dec 28, 2007 1:43 PM, Tim Evans <[EMAIL PROTECTED]> wrote: > While I can't comment on the 3400 series, we've had a bunch of 4000's > around here for years and recently upgraded most of our network to 5400 > series. > > With that caveat, all HP stacking does is let you manage the switches > using a single IP address. One of them is designated the commander and > the others are members. If one goes down (even the commander) the others > continue to function normally. When you connect to the stack using > telnet/ssh, you are prompted to select which switch to manage. When you > connect using http, you connect to the commander and have to select the > others to manage them. The configuration on each switch is independent - > you have to enable VLAN's on each one, define the same VLANs on each > one, etc. > > There is no special stacking connection, you just tie them together > using a LAN connection on each one. So, you don't get the full switch > backbone speed between stack members. Only the port speed of the to > ports connecting them. > > HTH > > > ...Tim > > > -----Original Message----- > From: Kurt Buff [mailto:[EMAIL PROTECTED] > Sent: Friday, December 28, 2007 1:34 PM > To: NT System Admin Issues > Subject: OT: HP Procurve - some questions > > We're putting together a plan for upgrading our network, and I have a > couple of questions regarding the Procurve 3400 series. > > They revolve around a decision I'll have to make about whether to get > two 24-port switches, or a single 48 port switch. > > I'd like to get two of the 24 port switches, and put them in a stacked > configuration, so that if one of them dies we won't lose everything, > with our servers splitting their NICs between the two 24 port > switches. > > They'll be the core switch(es) for our production network, and as such > will be the VLAN termination point, router, root bridge, etc., and I'm > wondering what the gotchas are for this kind of setup. > > Does anyone have experience with these, and how they behave if one of > the stacked switched does a face plant? > > I'm also interested in the speed penalty that stacking incurs, if any. > I haven't found hard figures on the HP site, but we're going to be > considering SANs later in the year, and I want to make sure that we > don't compromise their inherent 10Gig capability - we're thinking > iSCSI, or even FC over Ethernet, if that becomes useful by then. > > TIA, > > Kurt > > ~ Upgrade to Next Generation Antispam/Antivirus with Ninja! ~ > ~ <http://www.sunbelt-software.com/SunbeltMessagingNinja.cfm> ~ > > ~ Upgrade to Next Generation Antispam/Antivirus with Ninja! ~ > ~ <http://www.sunbelt-software.com/SunbeltMessagingNinja.cfm> ~ > ~ Upgrade to Next Generation Antispam/Antivirus with Ninja! ~ ~ <http://www.sunbelt-software.com/SunbeltMessagingNinja.cfm> ~