What isn't working. Do the machines on the lab vlan not get an IP address? What device is routing from lab vlan to the vlan where dhcp server is?
From: Jay Dale [mailto:jd...@unetek.com] Sent: Friday, January 27, 2012 2:36 PM To: NT System Admin Issues Subject: Setup separate lab VLAN Hey all, I'm truly stuck, hopefully I can find some assistance here. I have a client which is a school that is running out of IP addresses. Their subnet is 192.168.1.x/24 I would like to segment off their lab, which is around 50 PC's right there (in addition to all the youtube/facebook users) on it's own VLAN using subnet 192.168.2.x/24 I'm currently using 4 Extreme x460's - 1 of which is dedicated only to lab machines. I've set up another DHCP scope for the 192.168.2.x network. I created a VLAN on the switch and did the following commands: Create vlan Lab Configure vlan lab ipaddress 192.168.2.10/24 Configure vlan lab add ports 1:1-1:48 Enable bootprelay vlan lab Configure bootprelay add <ip of DHCP server> Configure bootprelay dhcp-agent information option Configure bootprelay dhcp-agent information check Enable ipforwarding vlan Lab I activated the scope, but it doesn't work. Is there a manual scope option that needs to be entered? Thanks, Jay Jay Dale Senior Systems Administrator Unetek, Inc. Phone: 281.574.2414 Email:jd...@unetek.com<mailto:jd...@unetek.com> Confidentiality Notice: This e-mail, including any attached files, may contain confidential and/or privileged information for the sole use of the intended recipient. If you are not the intended recipient, you are hereby notified that any review, dissemination or copying of this e-mail and attachments, if any, or the information contained herein, is strictly prohibited. If you are not the intended recipient (or authorized to receive information for the intended recipient), please contact the sender by reply e-mail and delete all copies of this message. ~ Finally, powerful endpoint security that ISN'T a resource hog! ~ ~ <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/> ~ --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com<mailto:listmana...@lyris.sunbeltsoftware.com> with the body: unsubscribe ntsysadmin ~ Finally, powerful endpoint security that ISN'T a resource hog! ~ ~ <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/> ~ --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe ntsysadmin