All the registry entries are as you have them.... Although; my "Broadcom BCM5708C NetXtreme II GigE" cards were set to ENABLE 'Receive Side Scaling'. I changed them to 'Disable'. Each card disabled for a moment, then auto re-enabled; so I assume this does not need a restart.
These servers have teamed NICs; all our servers do. The BACS (BroadCom Advanced Control Suite) is set up for switch failover as each NIC is physically plugged to a different switch for failover. -----Original Message----- From: Miller Bonnie L. [mailto:[EMAIL PROTECTED] Sent: Wednesday, July 16, 2008 10:29 AM To: NT System Admin Issues Subject: RE: Disconnected on a schedule??? They're in the same area of the registry--My .reg file that I import looks like this: Windows Registry Editor Version 5.00 [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters] "EnableTCPA"=dword:00000000 "EnableRSS"=dword:00000000 "EnableTCPChimney"=dword:00000000 Also, on the Broadcom NIC(s) properties, look at the advanced tab. Make sure "Receive Side Scaling" is set to Disable. I haven't done the netsh method, but I understand that can change it w/out needing a server reboot. -Bonnie -----Original Message----- From: Stephen Wimberly [mailto:[EMAIL PROTECTED] Sent: Wednesday, July 16, 2008 7:23 AM To: NT System Admin Issues Subject: RE: Disconnected on a schedule??? Thanks Bonnie! The TCP Chimney options are off! (I had to look, @ HKLM\System\CurrentControlSet\Services\Tcpip\Parapeters\EnableTCPChimney=0 I've never configured them either way!) The SNP I don't know how to check. I see where I can use a netsh to set it to disabled, but how would I see its current state? -----Original Message----- From: Miller Bonnie L. [mailto:[EMAIL PROTECTED] Sent: Wednesday, July 16, 2008 8:56 AM To: NT System Admin Issues Subject: RE: Disconnected on a schedule??? Any kind of backup or snapshot taking place at those times? Although I can't say this would happen like clockwork, have you already disabled the Chimney/SNP network options on those servers? -Bonnie From: Stephen Wimberly [mailto:[EMAIL PROTECTED] Sent: Wednesday, July 16, 2008 5:51 AM To: NT System Admin Issues Subject: Disconnected on a schedule??? We have workstations that appear to be losing connection to the file share on the server at almost precise times, every six hours. 7 AM, 1 PM, 7 PM, 1 AM; Repeat. The event logs on the workstation and servers are clean, Domain controllers and file share server. So I assume the loss is not long enough for the OS to recognize it. Although we have a custom application running on many machines that can't seem to handle the brief outage and fails like clockwork. The application vendor tells us it has a sixty second timeout before it will fail; certainly long enough to handle any brief disconnect. Network traces (using wireshark) from the server to workstation and workstation to server do not show any sign of failure. A script that updates a text file on the server every fifteen seconds does show the failure, it fails to update the text file on the server for up to four _minutes_ at a time! Although during the four minute failure period it's able to update once or twice during the outage, so it's not a total blackout. Workstations map a drive to the file share using a DFS path; ie: \\domain\share <file:///\\domain\share> . So we tested a direct mapping using \\server\share <file:///\\server\share> , and we get the same result. We mapped drives to two different file servers, each file server is in a different building on different ends of campus. The workstations used four test drive mappings, two for each server, one DFS on each server and one direct for each server. All four drive mappings failed at the same time. The connection to the SQL server is never lost. The SQL server is plugged into the same network switch as the file server. The Windows Domain has no trusts; it's a single domain forest. There are no services on any server with a six hour schedule that we know of. Backup runs daily at midnight and completes prior to 7 AM. Virus scan is still running at the 7 AM hour, but is long since complete by the 1 PM hour. Both file servers are Dell PE 2950 running Windows Server 2003 R2; All drivers seem up to date with Dell's support site. Workstations are a variety of makes, running either Windows XP Pro SP2, Windows XP Pro SP3 and Windows Vista SP1 and are scattered all over campus on different network subnets. Our network department is telling us that the network is fine, it's either a workstation or a server issue. Anyone seen this type of thing before??? Thanks! ~ Upgrade to Next Generation Antispam/Antivirus with Ninja! ~ ~ <http://www.sunbelt-software.com/SunbeltMessagingNinja.cfm> ~ ~ Upgrade to Next Generation Antispam/Antivirus with Ninja! ~ ~ <http://www.sunbelt-software.com/SunbeltMessagingNinja.cfm> ~ ~ Upgrade to Next Generation Antispam/Antivirus with Ninja! ~ ~ <http://www.sunbelt-software.com/SunbeltMessagingNinja.cfm> ~
