RIP will not work across an IPSec VPN as it uses broadcast/multicast -
you'd have to setup unicast neighbor statements (but now that I think
about it, this may not be possible on the PIX).  You'll have to use
static routes to point each branch to the Hub when trying to reach other
branches.  You'll also need some special config on your Hub
router/firewall to allow VPN "hairpinning" (VPN traffic entering the
outside interface, looping, and exiting the same interface).

 

This also assumes your Hub site has enough bandwidth provisioned to
service all your branch sites accessing other remote sites through it.

 

What kind of device sits in front of the PIXs at each location?  What
kind of connection is it at each site?

 

Depending on your budget, number of branches, and your personal
investment - you could look at DMVPN as an option.  Dynamic Multipoint
VPN essentially allows dynamic IPSec VPN tunnels to be built on the fly
between branches - eliminating the need for traffic to traverse the hub
(and thus comsume bandwidth).  Not to mention other benefits, such as
the ability to run routing protocols, reduce configuration on the
hub/spoke, and (b/c DMVPN relies on GREoIPSec) the ability to send
multicast/broadcast traffic across the tunnels.

Aaron Rohyans 
IT Coordinator, IDC-USA 
[EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>  
317.244.8307 (V) 
317.244.4600 (F) 

________________________________

From: Ralph Smith [mailto:[EMAIL PROTECTED] 
Sent: Thursday, September 18, 2008 9:50 AM
To: NT System Admin Issues
Subject: VPN and Routing Question

 

I have several branch offices connected to our main offices with site to
site VPNs.  Each location has a PIX 506E.  This has worked great with
never any problems.  Now, however, I am getting some employees who work
at more than one branch office, and they are requesting the ability to
access files at their other offices no matter which one they are in.

I could set up VPNs between the branch offices, but this could get
quickly out of hand. 

 

If I turn on RIP on all the PIXs, will that work to enable communication
between all the branch offices over the VPNs through the PIX at the main
office?

 

Ralph Smith
Gateway Community Industries
845-331-1261 x234

 

 

 

Confidentiality Notice:

******************

This communication, including any attachments, may contain confidential
information and is intended only for the individual or entity to whom it
is addressed. Any review, dissemination, or copying of this
communication by anyone other than the intended recipient is strictly
prohibited. If you are not the intended recipient, please contact the
sender by reply email, delete and destroy all copies of the original
message.

 

 

 

~ Finally, powerful endpoint security that ISN'T a resource hog! ~
~ <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/>  ~

Reply via email to