Sorry was not paying attention to that. It sounds like it is time to get a ticket and pack a bag unless he has someone closer that could go do the work.
Jon On Thu, May 13, 2010 at 7:41 PM, James Hill <james.h...@superamart.com.au>wrote: > He covered that one. > > > > What can't be done / makes no difference: > > 4) Map drives to *any* shares from another box > > > > > > *From:* Jon Harris [mailto:jk.har...@gmail.com] > *Sent:* Friday, 14 May 2010 9:40 AM > > *To:* NT System Admin Issues > *Subject:* Re: XP Box inaccessible > > > > What about just mapping the drive's admin share and pulling what you need? > > > > Jon > > On Thu, May 13, 2010 at 7:34 PM, Peter van Houten <peter...@gmail.com> > wrote: > > Well ironically, it is far from "hung" but I know what you mean. There > are a number of bugs that have this effect; the less elaborate just > overwrite files such as userinit.exe with their own code, make a few reg > changes and cause the login problem. > > Type in the login and password, off it goes..."loading your personal > settings"...but then instead of going to the desktop, it simply logs off. > > So the computer is "running" and one can observe certain > processes remotely as I pointed out. One just can't get any %$#&@(&$! > work done! > > -- > Peter van Houten > > On the 14 May, 2010 01:21, Jon Harris wrote the following: > > So what you have is a hung box some where between logon and logoff? > Jon > > On Thu, May 13, 2010 at 7:09 PM, Peter van Houten <peter...@gmail.com > > <mailto:peter...@gmail.com>> wrote: > > Thanks Jon; I probably didn't lay out my explanation properly but I do > have remote access; it simply goes through the same login-logoff routine > as a local login. > > -- > Peter van Houten > > On the 14 May, 2010 00:58, Jon Harris wrote the following: > > Isn't there a GPO that would turn on remote access for Domain > Admins? > If it is part of a domain and you have access to the Domain > Controller > then just have it restarted once or twice and you should be good > to go. > Jon > > On Thu, May 13, 2010 at 6:26 PM, Peter van Houten > <peter...@gmail.com <mailto:peter...@gmail.com> > > <mailto:peter...@gmail.com <mailto:peter...@gmail.com>>> wrote: > > I have a XP Pro [fully patched :-) ] box on a network that > has been > infected (probably Virut). It is the classic login...loading > your > personal settings...logging off scenario. > > Recovering the data and fixing the malware problem is easy. > The real > problem is that the box is 300 miles away, so I am trying to > avoid > flying there tomorrow, just before the weekend. > > What can't be done / makes no difference: > ----------------------------------------------------------- > 1) Login locally (admin credentials make no difference) > 2) Login remotely using RDP or VNC, directly via VPN or via > another box > on the remote network (goes through the motions as above). > 2) Start in any form of safe mode. > 3) Restore to earlier date, last known good config. > 4) Map drives to *any* shares from another box > 5) Use any clever login scripts on the server > 6) Use psexec to run anything remotely. > 7) Instruct the user to step through anything technical :-( > > What can be done: > -------------------------- > 1) Ping the box > 2) Netbios is enabled, so it shows in network > 3) Scan the IP and show ports 139 and 445 open > 4) Open and close a null RPC connection (enum, etc not helping) > > My hope is that one of you boffins has a script that will, > via RPC turn > on the telnet server, open port 23 and let me copy a > document from the > desktop [aarrgh] to USB. Or something equally as clever... > > TIA but please no advice on malware, > > -- > Peter van Houten > > > ~ Finally, powerful endpoint security that ISN'T a resource hog! ~ > ~ <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/> ~ > > > > > > > > > > > > ~ Finally, powerful endpoint security that ISN'T a resource hog! ~ ~ <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/> ~