Hi Balaji
you can use the nuke lens distortion node with the lens type set to anamorphic to undistort. track on the undistorted plates in your case I presume you have a nuke 3d scene with projections you'll have to redistort the output of your 3d scene, this can be done using the same lens distortion node and composite it on your original plate which is untouched and distorted. hope that helps *Shailendra* On Tue, May 31, 2011 at 9:42 AM, Balaji K <[email protected]>wrote: > Hi Jeremy Fernsler, > > Can you explain that expression, I need to try. > > > Thanks > Balaji.k > > > Jeremy Fernsler wrote: > > Hello, > > Though I'm not entirely clear about what you're asking, the last time we > worked on an anamorphic project here we had some issues with the foundry > plugins not respecting the Anamorphic project settings. With our project > settings set to a non square pixel ratio, the camera smooth plugin was > skewing oddly. This was because the x axis translations were not taking our > pixel ratio into account. I wrote an expression to fix it - though we > eventually went with a different solution. I don't know if that's the issue > that you're experiencing, but it may be something to look into... > > Good luck! > > -Jeremy Fernsler > > www.divevisual.com > > > On May 27, 2011, at 7:28 AM, Balaji K wrote: > > Hi > > Any one know how to track anamarphic lens distrorted plate with camera > tracker. what is procedure for that. I tracked without distortion, but the > projection is not matching exactly because of distortion, I need to remove > the distortion and add again. > > > thanks > balaji-k > > > > -- > <MPC.jpg> > <balaji-k.vcf>_______________________________________________ > Nuke-users mailing list > [email protected], http://forums.thefoundry.co.uk/ > http://support.thefoundry.co.uk/cgi-bin/mailman/listinfo/nuke-users > > > _______________________________________________ > Nuke-users mailing list > [email protected], http://forums.thefoundry.co.uk/ > http://support.thefoundry.co.uk/cgi-bin/mailman/listinfo/nuke-users > > > > -- > > _______________________________________________ > Nuke-users mailing list > [email protected], http://forums.thefoundry.co.uk/ > http://support.thefoundry.co.uk/cgi-bin/mailman/listinfo/nuke-users >
_______________________________________________ Nuke-users mailing list [email protected], http://forums.thefoundry.co.uk/ http://support.thefoundry.co.uk/cgi-bin/mailman/listinfo/nuke-users
